rear cargo cover

[ahardb0dy]

Do the newer ( newer than WD21) pathfinders have a rear cargo cover and if so will it work in a WD21 with modification?

[RF600]

I believe they will work. Yes there will be modifications. I want to do it. I know that you will need a spot weld cutter to take the brackets off and re-weld them to the body. I think the bezel around the bracket is removable, off of the donor vehicle, not sure. I have not found a suitable donor yet.

[ahardb0dy]

I found one at the junkyard last weekend, well I saw the brackets the cover was gone, and saw how they were, the front brackets are like recessed into the panel, I'm sure they could be mounted somehow into the WD21. Problem will be finding the cover part. Need to replace my hooptie fabric, 2 broom handle cover I made

[Precise1]

I have to dig around in the pathfinders today, so I'll do some basic measurements to make sure it can fit or not. Yes, there would probably be some cutting involved...

 

B

[Alkorahil]

I dont think one from a 2013 will be long enough.....

[Precise1]

Ok, one from a 1999.0 R50 is 25" deep, 55" wide at rear most clip, 58" wide forward.

 

A WD21 is more like 52" rear and 55", 25" forward of thatNot that it couldn't be done, but a universal aftermarket might be just as cheap/easy.

 

B