will a VG30E bolt up to the transmission for the 4 cylinder out of a pickup

[Dizer92Pathfinder]

Will the VG30E out of a 92 pathfinder bolt up to the transmission in a 92 pickup? Please answer quick I have a guy wanting to buy my old VG30E . Would he have to do alot of Fabrication to get the VG30 into it?

[mluczaj22]

sorry i kinda mis read your post. so you wanna put the vg in a truck that had a 4 cylinder? im pretty sure the vg will bolt up to the auto. not sure if they used a different trans for the manual 4 cylinders or not. someone will chime in im sure. but no fab work. just ecu swap and harness i believe. im sure someone or here has done the swap.

Edited August 9, 2012 by mluczaj22

[ahardb0dy]

not sure I know the trans/transfer case combo new in the crate has different part numbers from the V6 to the 4 cylinder. Oem-surplus used to have them in the crate for sale.

[mluczaj22]

i know its different trans v6 truck 2wd to v6 pathy 4wd. but not too sure about the 4 cylinders.

[JamesRich]

The bell housing is different from VG30 to 4 cylinder.

James

[mluczaj22]

The bell housing is different from VG30 to 4 cylinder.

James

do you know if the trans are the same though?

[JamesRich]

The internals are probably the same but the case is different. The VG30 won't bolt up to a 4 cylinder transmission if that's what your looking for.

James

[Dizer92Pathfinder]

cool thanks .