trexterra Posted June 18, 2012 Share Posted June 18, 2012 my searches between here and 4x4parts and google are not getting me any options. Has anybody made a solution to the extreme angle that isn't home brewed out of ABS plastic? Maybe I just didn't search for the right key words but hopefully someone has the answer for me. Thanks, Brady Link to comment Share on other sites More sharing options...
Tungsten Posted June 18, 2012 Share Posted June 18, 2012 (edited) Use a hardbody intake pipe or lower the air box. Edited June 18, 2012 by Tungsten Link to comment Share on other sites More sharing options...
trexterra Posted June 18, 2012 Author Share Posted June 18, 2012 sorry I should have specified, I own a 95 Hardbody. This is just the best forum even though i'm not a pathy! I guess I didn't look under the box much... do you mean like chop the mounts for it? Thanks Link to comment Share on other sites More sharing options...
Adam Posted June 18, 2012 Share Posted June 18, 2012 What's wrong with homebrewed? and ABS plastic? Link to comment Share on other sites More sharing options...
madhornet Posted June 18, 2012 Share Posted June 18, 2012 ive done a couple and had no problems Link to comment Share on other sites More sharing options...
nunya Posted June 18, 2012 Share Posted June 18, 2012 Ask adamzan, when he was on his 1st roadtrip Precice1 set his up for him. No plumbing isle at HomeDepot needed, just a screwdriver iirc Link to comment Share on other sites More sharing options...
Trogdor636 Posted June 18, 2012 Share Posted June 18, 2012 Do you have a VG or a KA? That would be my first question. Link to comment Share on other sites More sharing options...
Tungsten Posted June 18, 2012 Share Posted June 18, 2012 You can always get a cold air filter and adapter. Link to comment Share on other sites More sharing options...
Trogdor636 Posted June 18, 2012 Share Posted June 18, 2012 So in your profile it said VG. So try this..... http://www.nissanpathfinders.net/forum/topic/31634-3-body-lift-installed-air-box-help/page__hl__airbox Link to comment Share on other sites More sharing options...
trexterra Posted June 18, 2012 Author Share Posted June 18, 2012 Ok sweet thanks for the lead! Sent from my Galaxy Nexus using Tapatalk 2 Link to comment Share on other sites More sharing options...
trexterra Posted June 19, 2012 Author Share Posted June 19, 2012 I took out the mounts and for now it is just going to be rigged in place with zip ties. Probably figure out something more permanent after I decide whether or not I should home brew a snorkel. I've seen some pretty good ones for xterras and they are not much different Sent from my Galaxy Nexus using Tapatalk 2 Link to comment Share on other sites More sharing options...
Precise1 Posted June 19, 2012 Share Posted June 19, 2012 Glad you got it figured out. Check out Kiwipete's snorkel, that's the best home made one I have seen and plan to emulate it... B Link to comment Share on other sites More sharing options...
trexterra Posted June 19, 2012 Author Share Posted June 19, 2012 Right on thanks B Sent from my Galaxy Nexus using Tapatalk 2 Link to comment Share on other sites More sharing options...
unccpathfinder Posted June 20, 2012 Share Posted June 20, 2012 I used a sceptre rubber adapter and made it work after broke on the trail...have been running for 2 years without an issue Link to comment Share on other sites More sharing options...
trexterra Posted June 21, 2012 Author Share Posted June 21, 2012 UNCC I think I ran a trail with you at GONE 11'. I recognize the multicolor body panels haha. If I remember correctly you were having tie rod problems? I was in a silver 1st gen X Link to comment Share on other sites More sharing options...
raenrfm Posted June 23, 2012 Share Posted June 23, 2012 Had the same issue and got one of these, dirt cheap and works great: http://www.ebay.ca/itm/300665095809?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649#ht_2890wt_1041 Link to comment Share on other sites More sharing options...
trexterra Posted June 23, 2012 Author Share Posted June 23, 2012 yeah but i don't like the idea of an open cone filter. I'll be figuring out something with the stock air box Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now