Rear Sway Bar Bushing

[William]

Hi Guys

 

I am looking for a set of new Rear Sway Bar Bushings for my WD21

and came across a set by SuperPro (Australia). The problem

is they offer that same Bushing with 4 different inner diameters:

 

Bar diameter: 23,25,26,29mm available

 

 

So which one is it please?

 

William

[djratlif]

The easiest way I know to find out is to get a set of calipers and measure the sway bar where it is clean. this should give you the bar diameter on your rig. I know with GM products at the dealership I work at they throw different sway bar sizes at nearly identical trucks otherwise. Hope this helps, D

[headpeace]

you could remove the rear sway bar, then you wouldn't need the bushings at all

[Slartibartfast]

Measure the bar?

[silverton]

According to the 1994 FSM, the rear sway bar is 25mm.

[teixeira]

you could remove the rear sway bar, then you wouldn't need the bushings at all

problem solved.

I wish I had mine installed, yet...

[AndyC]

Two years, no sway, well no sway bar. The truck sways!

[silverton]

I also run my truck with the rear sway bar disconnected, only because I drive it on the trail more than the street. If it was a mostly street truck I'd leave the rear sway connected.