Jump to content
  • Sign In Changes:  You now need to sign in using the email address associated with your account, combined with your current password.  Using your display name and password is no longer supported.

 

  • If you are currently trying to register, are not receiving the validation email, and are using an Outlook, Hotmail or Yahoo domain email address, please change your email address to something other than those (or temporary email providers). These domains are known to have problems delivering emails from the community.

idling ?


joeyd50
 Share

Recommended Posts

Been gone a while, lost the site,1994 4X4 3.0 V6 Automatic, 358000 miles, Truck runs great once it worms up, when I first start truck in the mourning now it wont idle, I got to keep giving it gas, was starting and idling fine up to a few days ago. Where should I start looking first?

Thanks

Joe

Link to comment
Share on other sites

Try reading the computer codes, there's a great write-up on here somewhere. On my 95 I pulled the seat out so I could get to it more easily. (Didn't hurt to clean under there, either! :D)

 

Also check the wiring to your MAF, specifically the plug. Seems like every time someone's got an idle issue, it's the MAF. If it looks okay, try running a new ground to the body. (Whatever you do, don't try to clean the MAF, they never work right afterwards!)

Link to comment
Share on other sites

last time i had that issue the crappy Bosch plugs i put in a couple of months before that burnt out i chased that problem for a month not thinking the plugs were bad being just replaced also a bad distributor bearing can cause the same issue or a burnt out cap and rotor

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...