Winch bar for R50?

[TooQForYou]

Anyone know how to get ahold of one of these? I can't find anything on it. I just happened upon this pic on http://www.easternwrecker.com/

 

[skulptr]

and how, might i ask, did you find that!

[TooQForYou]

I searched for 'pathfinder tjm' on yahoo image search and that turned up! haha

[Northernpathy]

I wouldn't want one of those. Is just a winch sitting on a brush guard. A brush guard that is not load bearing. Even the OEM brush guard had thicker main supports. Those are paper thin. That thing will get ripped off or very badly bent the first time it is used. If you can't find it anywhere, that is probably because it was a prototype or something. I can't see how those two tiny supports could take over 4000lbs of weight from the truck.

[dududuckling]

Did a little search and came across this

 

http://www.ramsey.com/automotive/docs/Grille%20Guard%20Brush%20Guard%20update.pdf

 

http://www.ramsey.com/automotive/mounting_systems.html

 

They probably mounted a universal brush guard on the pathy with a winch on it.

[fleurys]

i don't even want to think about winching at an angle with this...

[Kingman]

That looks like a serious failure waiting to happen...

[tekazgtr1984]

I wouldn't want one of those. Is just a winch sitting on a brush guard. A brush guard that is not load bearing. Even the OEM brush guard had thicker main supports. Those are paper thin. That thing will get ripped off or very badly bent the first time it is used. If you can't find it anywhere, that is probably because it was a prototype or something. I can't see how those two tiny supports could take over 4000lbs of weight from the truck.

 

This.

 

i don't even want to think about winching at an angle with this...

 

And this.

 

That looks like a serious failure waiting to happen...

 

And this.

 

Looks more for show than anything functional. Or maybe winch transport at best...

[shift220]

It's hard to judge what was done behind the winch, but most likely it is for looks. A couple hundred pounds could buckle those supports.

[TooQForYou]

Good to know.

[tekazgtr1984]

For the record, I think Keelhaul has the best winch set-up on a stock bumper. Looks badass, too.