Resister pack

[Nismojunky]

Where's the resister pack for the blower motor mine doesn't work on 4

[wood6078]

Take out the glovebox, and it's right behind it

[Nismojunky]

Thanks

[RustyButTrusty]

Ah you have the same problem as me. It doesn't sound like its the resistor though. If the resistor was bad the fan would only work on 4 and not on the other speeds. The fan switch has probably got a dirty/corroded contact, so it's not letting power get to the motor on the 4 speed setting.

[Nismojunky]

hmm wheres this switch

[RustyButTrusty]

The little lever that you move back and forth to change the fan speed, that's connected to the switch. It's a pain to get out. I just decided to live with only 3 speeds for now, cause I don't wanna risk breaking everything trying to fix it.

[Nismojunky]

thats what ive been doing for a year now, the problem is im a contractor and i have lunch in my truck and its friggen cold right now and 3 isnt moving enough heat into the cab (im a smoker window is cracked)

[RustyButTrusty]

thats what ive been doing for a year now, the problem is im a contractor and i have lunch in my truck and its friggen cold right now and 3 isnt moving enough heat into the cab (im a smoker window is cracked)

 

Yeah I hear ya. That 4th speed makes a big difference. Well what I did is went to the local pull a part and took the who heater control assembly out of either a pathfinder or a hardbody. It helped get me familiar with the installation process without tearing up something on my truck. I think the whole assembly was less than $20. The biggest difficultly in getting the control unit out is unhooking the cables that attach to the levers. Very little room to work, and alot of brittle plastic parts.

[Nismojunky]

thats what i was afraid of

[ahardb0dy]

I recently repaired a problem with my fan switch, took a few pics that can be found here:

 

http://www.nissanpathfinders.net/forum/index.php?showtopic=27677&st=0&p=517497&fromsearch=1entry517497