Punkfinder Posted October 20, 2010 Share Posted October 20, 2010 Need to replace the driver-side exhaust header gasket for the Pacesetters on my 93 SE-V6. Pacesetter says it requires gasket #G7175 and I can't remember exactly what they looked like. Do you think this is a gasket specific to the Pacesetters or will an OEM exhaust manifold gasket fit properly? Thanks Link to comment Share on other sites More sharing options...
madhornet Posted October 20, 2010 Share Posted October 20, 2010 any gasket will work and also for xtra xtra protection install it with copper silicone or rtv sealant that stuff works so good it can also be used with out the gasket if it wasnt available Link to comment Share on other sites More sharing options...
Nismojunky Posted October 20, 2010 Share Posted October 20, 2010 What I did for mine was I took 2 stock gaskets and glued them together with that copper stuff and that's holding up well been over a year now no problems Link to comment Share on other sites More sharing options...
Tungsten Posted October 20, 2010 Share Posted October 20, 2010 you don't need silicone if a gasket is new Link to comment Share on other sites More sharing options...
KovemaN Posted October 20, 2010 Share Posted October 20, 2010 I really like the Felpro gasket for this application. It should be nearly identical to OEM and it might be cheaper at your local auto parts store. I also like the copper RTV, but the good metal gaskets shouldn't need it. Paper exhaust gaskets are crap. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now