Pacesetter Exhaust Header Gasket

[Punkfinder]

Need to replace the driver-side exhaust header gasket for the Pacesetters on my 93 SE-V6.

 

Pacesetter says it requires gasket #G7175 and I can't remember exactly what they looked like. Do you think this is a gasket specific to the Pacesetters or will an OEM exhaust manifold gasket fit properly?

 

Thanks

[madhornet]

any gasket will work and also for xtra xtra protection install it with copper silicone or rtv sealant that stuff works so good it can also be used with out the gasket if it wasnt available

[Nismojunky]

What I did for mine was I took 2 stock gaskets and glued them together with that copper stuff and that's holding up well been over a year now no problems

[Tungsten]

you don't need silicone if a gasket is new

[KovemaN]

I really like the Felpro gasket for this application. It should be nearly identical to OEM and it might be cheaper at your local auto parts store. I also like the copper RTV, but the good metal gaskets shouldn't need it. Paper exhaust gaskets are crap.