terra88 Posted October 17, 2010 Share Posted October 17, 2010 Hey all, I bought myself another Terrano, this one is a 1994 4 door, and want to do a 2inch body lift. I have searched unsuccessfully for bolt lengths so hopefully someone knows the bolts I need for the 2 inch lift blocks. Many thanks Lee Link to comment Share on other sites More sharing options...
kiwipete Posted October 17, 2010 Share Posted October 17, 2010 Hey all, I bought myself another Terrano, this one is a 1994 4 door, and want to do a 2inch body lift. I have searched unsuccessfully for bolt lengths so hopefully someone knows the bolts I need for the 2 inch lift blocks. Many thanks Lee Easy, remove one of the bolts and add 2 inches to it? Rear bolts are a different size too, cannot remember what though. Easiest one to remove is one of the front ones too. Link to comment Share on other sites More sharing options...
terra88 Posted October 17, 2010 Author Share Posted October 17, 2010 Easy, remove one of the bolts and add 2 inches to it? Rear bolts are a different size too, cannot remember what though. Easiest one to remove is one of the front ones too. Yeah I wanted to get everything ready to do this week without pulling I half apart. Surely someone knows the standard bolt size and thread for the rears ? Link to comment Share on other sites More sharing options...
kiwipete Posted October 17, 2010 Share Posted October 17, 2010 Yeah I wanted to get everything ready to do this week without pulling I half apart. Surely someone knows the standard bolt size and thread for the rears ? That was my point, 2 minutes to remove it and put it back, same with the back one. Couldn't be easier. Link to comment Share on other sites More sharing options...
Precise1 Posted October 17, 2010 Share Posted October 17, 2010 http://www.nissanpathfinders.net/forum/index.php?showtopic=5325&view=findpost&p=364730 For general info, the entire thread http://www.nissanpathfinders.net/forum/index.php?showtopic=5325&st=0 B Link to comment Share on other sites More sharing options...
terra88 Posted October 17, 2010 Author Share Posted October 17, 2010 http://www.nissanpathfinders.net/forum/index.php?showtopic=5325&view=findpost&p=364730 For general info, the entire thread http://www.nissanpathfinders.net/forum/index.php?showtopic=5325&st=0 B Thanks mate, I can see I need the m12x1.25 x150mm bolts for the rear and m10x1.25 x150mm bolts for the middle(6 of?) but are the radiator support ones a bit shorter? Link to comment Share on other sites More sharing options...
MY1PATH Posted October 18, 2010 Share Posted October 18, 2010 but are the radiator support ones a bit shorter? those are the easliest ones to get to just pull one out and measure. Link to comment Share on other sites More sharing options...
Precise1 Posted October 19, 2010 Share Posted October 19, 2010 True, but I was feeling generous... Thanks mate, I can see I need the m12x1.25 x150mm bolts for the rear and m10x1.25 x150mm bolts for the middle(6 of?) but are the radiator support ones a bit shorter? Crap, I went out last night with a flashlight and tape measure, but never posted. The forward most bolts are 6" or 150mm for a 2" lift, using all the stock washers and isolators + the 2" (50mm) puck with no more than 20mm thread protruding. I installed the bolt upwards with the head on the bottom so it could never contact from below and there is no issue of clearance or interference above. Want a picture?? B Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now