terra88

might go check out the front end again to see if that would work?

yeah I looked at modifying the cross member but the cv's sit close to the torsion bars as it is so you wouldn't gain much without dropping the whole lot. If I could get the kit or at least the main parts that would make life a lot easier

Hey mate, can you send me the link? I have never used craigslist before

Just cos it looks cool... I already have a 2" body lift and 2-3" of suspension lift, but the cv's are maxed out.

Thanks Mate

Hey guys, I'm in Australia and these 4" lifts are not available over here. I have previously had a 2 door terrano with a trailmaster lift but that kit is discontinued and not in stock. I am looking for a similar kit for my 94 wd21 but can't seem to find anyone that makes them. I know a sas would be a better idea but don't have the time or resourses to do that. any info would be great, Thanks Lee

Thanks mate. The factory fuel lines will be in negative pressure because the IP sucks the fuel from the tank. I looked into holley red or some walbro pumps that pump between 4-7 psi and pump on demand.

Has anyone fitted a Holley (or electric) fuel pump to their TD27T terrano? Apparently the factory manual injector pump can starve at higher revs and the extra fuel pressure being supplied to the pump helps power etc?

Seen on here about advancing the injector pump timing a few degrees, but can't find any info about how to measure it or how far to turn the pump. Saw on another site that you should move it towards the engine block by 1-2mm?? any help would be great...

awesome thanks mate..

I did a quick search but couldn't find the font used in the NPORA website logo. I want to make a windscreen sticker up and thought that the website banner would look pretty good..

Thanks mate, I can see I need the m12x1.25 x150mm bolts for the rear and m10x1.25 x150mm bolts for the middle(6 of?) but are the radiator support ones a bit shorter?

Yeah I wanted to get everything ready to do this week without pulling I half apart. Surely someone knows the standard bolt size and thread for the rears ?

Hey all, I bought myself another Terrano, this one is a 1994 4 door, and want to do a 2inch body lift. I have searched unsuccessfully for bolt lengths so hopefully someone knows the bolts I need for the 2 inch lift blocks. Many thanks Lee