New Signals :)

[Manifesto]

ALRIGHTY, so after being pulled over the same day I started driving this beast for not having functional signal lights up front,

I picked up some nifty LED markers from Part Source for $10 each and mounted them up.

A nice little improvement

 

[Precise1]

Cool!!

 

Now provide the link and a description of the install...

 

B

[GrimGreg]

I have standard bulb clearance lights for my front signals,they function, but aren't at all bright.

[Manifesto]

Install was pretty smooth. Drilled 2 holes in the steel plate for mounting, 3" apart.

Used my eyeball to drill the first hole, then once I had the light mounted with one screw, I used a sharpee to mark the 2nd.

I utilized an original hole already there to feed the wires through (was about 3/16")

 

As for wiring, I just cut off the ground connectors and spliced them entirely into the factory harness

 

I couldn't find the exact ones I used, but they're pretty similar to these

 

The LED's are way brighter than the original incandescent light bulbs that were there before

Edited May 3, 2010 by Manifesto

[adamzan]

Do they blink fast like it does when a bulb is burnt out. I've seen that happen with aftermarket signals.

[Manifesto]

yea... kinda -_-

[GrimGreg]

Yeah, mine too. For the LEDs you should be able to get a flasher add on though.