packie88 Posted October 28, 2009 Share Posted October 28, 2009 Just got off the phone with shrockworks and it so happens that they make sliders for the 89-95 pathfinder. they are the same cost as the xterra ones ($379) and they are weld on. They are not listed on the website but if you call they have. i talked with jim i think it was. Just another option. and figure i would let you all know Link to comment Share on other sites More sharing options...
OldSlowReliable Posted October 28, 2009 Share Posted October 28, 2009 I think, Im gonna drop out of school, and sell sliders for 400 bucks a pop for a living.....they really do make a killing on those... Link to comment Share on other sites More sharing options...
MY1PATH Posted October 28, 2009 Share Posted October 28, 2009 why not just get the trail gear toyota sliders from rugged rocks? Link to comment Share on other sites More sharing options...
nige Posted October 28, 2009 Share Posted October 28, 2009 do these sliders take a 3" body lift into account? or will they have a huge gap between the rocker and the slider? Link to comment Share on other sites More sharing options...
MY1PATH Posted October 28, 2009 Share Posted October 28, 2009 do these sliders take a 3" body lift into account? or will they have a huge gap between the rocker and the slider? they come with the legs de-tached so you can rotate them upwards before welding to compensate for BL Link to comment Share on other sites More sharing options...
packie88 Posted October 28, 2009 Author Share Posted October 28, 2009 theres an option to add a 3 inch bodylift on it. and i know right 400 is kinda insane. and i looked into the trail gear one and im considering em the only problem is the short ones are a little short and the long ones are to long. Link to comment Share on other sites More sharing options...
GrimGreg Posted October 30, 2009 Share Posted October 30, 2009 The local steel place sells 2" .120 wall square tube for about $5/foot (at least last time I bought any, and steel was high then). At that price I could make a set for $100 or even a little less for material cost. As with anything else, most of what you are paying for is the labor cost. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now