need help identifying this broken part

[Jetmugg]

There's a '97 R50 at the Pick-N-Pull in St Louis. I pulled some parts from it last weekend. It had suffered a pretty major under-hood fire.

 

Still lots of good interior and suspension parts, though. I won't have a chance to get there this weekend, but if there is another member in the StLouis area, perhaps they could "hook you up".

 

SteveM.

[msavides]

here is a photo of the orange sticker. I think maybe I need to add this photo to the sticky titled Do I have LSD?

 

Edited February 19, 2009 by msavides

[msavides]

here is a photo of the orange sticker. I think maybe I need to add this photo to the sticky titled Do I have LSD?

 

 

 

there is now a photo in the lsd sticky

[alexrex20]

I have yet to see a R50 in the pick-and-pull here.

 

 

i just got back from the pick-a-part. there were 2 early R50 Pathfinders and an early R50 QX4. also, there were 3 WD21s.

 

the other pick-a-part is a bit further, but 3x the size. i'm sure they'd have even more to pick from.

[GrimGreg]

i just got back from the pick-a-part. there were 2 early R50 Pathfinders and an early R50 QX4.

 

 

Did you get the part for him?

[tekazgtr1984]

Did you get the part for him?

 

[alexrex20]

Did you get the part for him?

 

 

no.

 

i looked directly at the part, and remembered this thread, but it didn't dawn on me to get the part for him.

 

ticker, i'd be more than happy to go back and get it for you. just paypal me $10. let me know!

[alexrex20]

anybody want a 31-spline LSD? anything else?

[ticker]

no.

 

i looked directly at the part, and remembered this thread, but it didn't dawn on me to get the part for him.

 

ticker, i'd be more than happy to go back and get it for you. just paypal me $10. let me know!

That's really nice of you. I just might take you up on that. I took the rest of the bracket off yesterday to show to my neighbor who is a car restoration guru. He said that because of how it is broken and the thickness(or lack thereof) of the metal that I should look to replace the part first, but if necessary he could try to weld it up and add a plate to it to make it more solid. So I'm going to try to call around to see if there are any R50's locally I can scavenge it off of. Probably won't know anything for a few days got to try to make some money tomorrow.

 

On a side note, while I was removing the bracket I took the opportunity to jack up the Pathy and I DO HAVE A LSD! I don't know where the sticker went but I could find no evidence of it.