ctpathy Posted June 21, 2008 Share Posted June 21, 2008 (edited) Hey guys Maybe someone has had these problems with their 95 and could help 1 my dome light will not work on the driver's door. yes i got a new door switch, but have no power going to the plug all other doors work fine? 2 My tach seems work when it wants to any thoughts ? Thanks Brian CTPATHY Edited June 21, 2008 by ctpathy Link to comment Share on other sites More sharing options...
Nismojunky Posted June 21, 2008 Share Posted June 21, 2008 for the lights try changing the fuse and for the second one no idea Link to comment Share on other sites More sharing options...
RowdoggNZ Posted June 22, 2008 Share Posted June 22, 2008 For the tach check that the tip of the needle is not touching the face of the gauge, this is a common problem in WD21s Link to comment Share on other sites More sharing options...
ctpathy Posted June 22, 2008 Author Share Posted June 22, 2008 for the lights try changing the fuse and for the second one no idea The fuse is good the light works when u open all the doors execpt the drivers door?? Link to comment Share on other sites More sharing options...
ctpathy Posted June 22, 2008 Author Share Posted June 22, 2008 For the tach check that the tip of the needle is not touching the face of the gauge, this is a common problem in WD21s I will check it out thanks Link to comment Share on other sites More sharing options...
kiwipete Posted June 22, 2008 Share Posted June 22, 2008 The fuse is good the light works when u open all the doors execpt the drivers door?? You will need to check the wiring at this switch, possibly having to trace it along the wiring loom under the door sill to see where the break is, cos a break is what's causing your problem. Link to comment Share on other sites More sharing options...
ctpathy Posted June 26, 2008 Author Share Posted June 26, 2008 (edited) You will need to check the wiring at this switch, possibly having to trace it along the wiring loom under the door sill to see where the break is, cos a break is what's causing your problem. you where right, There was a break in the wier thanks for your help Brian ctpathy Edited June 26, 2008 by ctpathy Link to comment Share on other sites More sharing options...
silver97ex Posted June 26, 2008 Share Posted June 26, 2008 Did you figure out anything with your tach? My 95 does the same thing. It jumps around nonstop. I don't get it. Link to comment Share on other sites More sharing options...
94extreme Posted June 26, 2008 Share Posted June 26, 2008 volt reg behind cluster or a bad tach sending unit. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now