Dome light/ tach

[ctpathy]

Hey guys

 

Maybe someone has had these problems with their 95 and could help

 

 

1 my dome light will not work on the driver's door.

yes i got a new door switch, but have no power going to the plug

all other doors work fine?

 

2 My tach seems work when it wants to any thoughts ?

 

Thanks Brian

CTPATHY

Edited June 21, 2008 by ctpathy

[Nismojunky]

for the lights try changing the fuse

 

and for the second one no idea

[RowdoggNZ]

For the tach check that the tip of the needle is not touching the face of the gauge, this is a common problem in WD21s

[ctpathy]

for the lights try changing the fuse

 

and for the second one no idea

 

 

The fuse is good the light works when u open all the doors execpt the drivers door??

[ctpathy]

For the tach check that the tip of the needle is not touching the face of the gauge, this is a common problem in WD21s

 

 

I will check it out thanks

[kiwipete]

The fuse is good the light works when u open all the doors execpt the drivers door??

You will need to check the wiring at this switch, possibly having to trace it along the wiring loom under the door sill to see where the break is, cos a break is what's causing your problem.

[ctpathy]

You will need to check the wiring at this switch, possibly having to trace it along the wiring loom under the door sill to see where the break is, cos a break is what's causing your problem.

 

 

you where right, There was a break in the wier thanks for your help

 

 

 

Brian

 

ctpathy

Edited June 26, 2008 by ctpathy

[silver97ex]

Did you figure out anything with your tach? My 95 does the same thing. It jumps around nonstop. I don't get it.

[94extreme]

volt reg behind cluster or a bad tach sending unit.