dagwoodzz Posted May 31, 2008 Share Posted May 31, 2008 yeah thanks everyone not sure what I would do without everyone thanks Dag for the distributor Your welcome, it's nice to have a member 6 miles away. Link to comment Share on other sites More sharing options...
Bobby Posted May 31, 2008 Author Share Posted May 31, 2008 Your welcome, it's nice to have a member 6 miles away. it really is Link to comment Share on other sites More sharing options...
Scottzilla Posted June 3, 2008 Share Posted June 3, 2008 I ended up having to use Vice-Grips and a hacksaw to get my rotor off last time. They sure do get stuck on there sometimes... Link to comment Share on other sites More sharing options...
Bobby Posted June 4, 2008 Author Share Posted June 4, 2008 I ended up having to use Vice-Grips and a hacksaw to get my rotor off last time. They sure do get stuck on there sometimes... yeah they really do. Link to comment Share on other sites More sharing options...
Precise1 Posted June 6, 2008 Share Posted June 6, 2008 not really sure, but i think the pin that keeps the gear in the right spot on the shaft broke. I think that is because i was trying to turn the rotor to get it off and it broke. I ended up having to use Vice-Grips and a hacksaw to get my rotor off last time. They sure do get stuck on there sometimes... Damn, I saw this mentioned in the PoHo thread and answered there, but I guess it wasn't seen. NEXT time, just heat it up with a torch. Don't melt it, (the pot metal goes quick) soft is good, then it pulls off just fine. I had to do this a few months ago... Sorry I was too late to save grief. Prying and hacking are bad and unnecessary! B Link to comment Share on other sites More sharing options...
Bobby Posted June 6, 2008 Author Share Posted June 6, 2008 Damn, I saw this mentioned in the PoHo thread and answered there, but I guess it wasn't seen. NEXT time, just heat it up with a torch. Don't melt it, (the pot metal goes quick) soft is good, then it pulls off just fine. I had to do this a few months ago... Sorry I was too late to save grief. Prying and hacking are bad and unnecessary! B yeah i know and i could of got a torch from work oh well life goes on Link to comment Share on other sites More sharing options...
Precise1 Posted June 6, 2008 Share Posted June 6, 2008 Buy a torch end, but not the cheapest!! You'll have problems with shut off and flame regulation if you do. Still for $20-30 you have it and a canister sitting and waiting for you in the garage. It will pay for it's self in time and frustration quickly. Besides, with it, you can: 1) fugger with the neighbors car 2) melt the crazy glue in your car locks 3) burn ants 4) light the crack pipe 5) remelt tar to seal a leaky roof 6) burn down the house 7) burn bushings out The list is endless... B Link to comment Share on other sites More sharing options...
Bobby Posted June 6, 2008 Author Share Posted June 6, 2008 Buy a torch end, but not the cheapest!! You'll have problems with shut off and flame regulation if you do. Still for $20-30 you have it and a canister sitting and waiting for you in the garage. It will pay for it's self in time and frustration quickly. Besides, with it, you can: 1) fugger with the neighbors car 2) melt the crazy glue in your car locks 3) burn ants 4) light the crack pipe 5) remelt tar to seal a leaky roof 6) burn down the house 7) burn bushings out The list is endless... B lol i love the list but thanks for the advise Link to comment Share on other sites More sharing options...
Chriskaw440 Posted June 6, 2008 Share Posted June 6, 2008 are cats flammable? I'd like to take a torch to my neighbors friggin cats....... Link to comment Share on other sites More sharing options...
k9sar Posted June 6, 2008 Share Posted June 6, 2008 yes, they are Link to comment Share on other sites More sharing options...
Bobby Posted June 7, 2008 Author Share Posted June 7, 2008 are cats flammable? I'd like to take a torch to my neighbors friggin cats....... just go to walmart and buy a cheap bb gun it works Link to comment Share on other sites More sharing options...
88pathoffroad Posted June 7, 2008 Share Posted June 7, 2008 Hey now, I'm a cat guy. Leave 'em alone! Link to comment Share on other sites More sharing options...
Scottzilla Posted June 9, 2008 Share Posted June 9, 2008 Buy a torch end, but not the cheapest!! You'll have problems with shut off and flame regulation if you do. Still for $20-30 you have it and a canister sitting and waiting for you in the garage. It will pay for it's self in time and frustration quickly. Besides, with it, you can: 1) fugger with the neighbors car 2) melt the crazy glue in your car locks 3) burn ants 4) light the crack pipe 5) remelt tar to seal a leaky roof 6) burn down the house 7) burn bushings out The list is endless... B Don't forget 8) Superpunk; light fireworks on 4th of July. They don't even need fuses... Link to comment Share on other sites More sharing options...
Precise1 Posted June 9, 2008 Share Posted June 9, 2008 B Link to comment Share on other sites More sharing options...
RedPath88 Posted June 9, 2008 Share Posted June 9, 2008 k9, can you verify that for us? Link to comment Share on other sites More sharing options...
Bobby Posted June 28, 2008 Author Share Posted June 28, 2008 so after messing with it and getting the timing right i now have a miss in the engine and dont know why. I changed all the wires and yes they are in the right order. I pull wire by wire to see witch cylinder is not firing but i cant seem to tell by the sound. I need some real help on this one. Link to comment Share on other sites More sharing options...
k9sar Posted June 29, 2008 Share Posted June 29, 2008 hookup a timing light to each plug and see if any are not firing. if all are firing, let the engine cool then pull the coil wire and crank it for a bit. Then pull each plug and see which is dry (failed injector). that's the route I'd take Link to comment Share on other sites More sharing options...
Bobby Posted June 29, 2008 Author Share Posted June 29, 2008 hookup a timing light to each plug and see if any are not firing. if all are firing, let the engine cool then pull the coil wire and crank it for a bit. Then pull each plug and see which is dry (failed injector). that's the route I'd take okay thanks Dag and I will try that tomrrow Link to comment Share on other sites More sharing options...
dagwoodzz Posted June 29, 2008 Share Posted June 29, 2008 I want to get the trucks dirty not my hands. Link to comment Share on other sites More sharing options...
Bobby Posted July 3, 2008 Author Share Posted July 3, 2008 well got a new distributor installed and im good to go party on Link to comment Share on other sites More sharing options...
Precise1 Posted July 3, 2008 Share Posted July 3, 2008 Good, I'm glad! So the old Dizzy wasn't firing right or messing up the timing? B Link to comment Share on other sites More sharing options...
Bobby Posted July 3, 2008 Author Share Posted July 3, 2008 Good, I'm glad! So the old Dizzy wasn't firing right or messing up the timing? B Yeah, the cam angle sensor was bad plus the bearing in the distributor was going out so I got a new one. Happy days Happy days Link to comment Share on other sites More sharing options...
Indigent Posted July 3, 2008 Share Posted July 3, 2008 One bit of future advice. I would recommend tapping of the rotor lightly with a hammer. It is better than pulling it up harshly. Also, if you pry on the rotor with the edge of the distributor as your prybase, you will break the distributor. Our distributors work like a mouse wheel. It has little holes in it as reference signal points. If you mess up the spacing of those holes, it will not work. The circuit board and whatnot inside of there is very easy to break. I would bet that if you were to take that old distributor apart, you will see some cracks inside. It is better to pound down to break torque on it because of the way the shaft sits in the bearings and mount. It will help absorb and brace some of that force. Pulling up will tweak the bearings. I am not talking about going at it with a 10 pound sledge or anything, just a few stern taps. It *should* help release it. Anyone else experience that? indigent. Link to comment Share on other sites More sharing options...
Bobby Posted July 7, 2008 Author Share Posted July 7, 2008 thanks for the advice the best part of all this is my miles per gallon I went from 260 a tank to 333 miles to the tank Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now