NOVA_mudfinder Posted March 4, 2007 Share Posted March 4, 2007 Didn't know if you guys know of a site that I can find either borla or flowmaster catback for my R50 anyhelp would be great, thanks Link to comment Share on other sites More sharing options...
nissandoms47 Posted March 4, 2007 Share Posted March 4, 2007 no one makes a bolt on one, you'd have to go custom. Link to comment Share on other sites More sharing options...
sammyb33 Posted March 4, 2007 Share Posted March 4, 2007 hey nova, where are you located in "NOVA" im in Winchester, maybe we can meet up sometime and wheel? Link to comment Share on other sites More sharing options...
5523Pathfinder Posted March 4, 2007 Share Posted March 4, 2007 HKS used to make one, but is it ever spendy! Go custom and get what you want. Shouldnt cost more than $400. Link to comment Share on other sites More sharing options...
NOVA_mudfinder Posted March 5, 2007 Author Share Posted March 5, 2007 Lburg i got some buddies we go wheelin on the powerlines near pevs with their jeeps Link to comment Share on other sites More sharing options...
NismoSkyZ Posted March 5, 2007 Share Posted March 5, 2007 Like everyone else said, you have to go custom. Stillen and HKS used to make them, but the only way your getting a good exhaust now is from a mom and pop shop. Go with Magnaflow. Link to comment Share on other sites More sharing options...
NOVA_mudfinder Posted March 5, 2007 Author Share Posted March 5, 2007 Should I just look for a place locally or do you guys have a place to recommend online Link to comment Share on other sites More sharing options...
88pathoffroad Posted March 5, 2007 Share Posted March 5, 2007 Please try to label your topic a little better, "exh" is not a good thread title. Just so you know. Link to comment Share on other sites More sharing options...
OBXbeachpathy Posted March 5, 2007 Share Posted March 5, 2007 I got a totally new, custom cat-back system from Big-Al's down in Norfolk for under $200, sounds awesome. Link to comment Share on other sites More sharing options...
96SE Posted April 19, 2007 Share Posted April 19, 2007 For those of you with a custom mom and pop exhaust, did you keep the same diameter tubing? What muffler did you use? Did you keep the resonator? It's time for a new exhaust on my VG33E so I'm looking for info Thanks Link to comment Share on other sites More sharing options...
GrnMchn Posted April 20, 2007 Share Posted April 20, 2007 I always get mufflers from Summitracing.com cuz noone can beat their prices even with shipping. Any halfway decent shop can do the install. I spent $110 on a flowmaster and another $75 for install. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now