Hytekrednek

Found out what was making it run like crap after doing the plugs, wires, and distibutor stuff. The bleep bleep bleeping vacuum line that is back there by the number 6 plug. And all of this after the 8 inches of snow is now fully melted.

Looks like I might be in the same predicament as some of you. My tranny whines in 5th gear, so along with all of the other issues I'm having with it now, it looks like it will be coming off the road for awhile so I can buy everything it needs.

I know that this is old but wanted to say if you search on here you will find that they put it up for sale on craigs list and had pics of it outside the shop. james

It wasn't. Only problem is that they cut and added a relay in main power wire to the ignition switch. Now I'm a little worried it may not crank. James

Pulled out an old alarm setup that I didn't even know was there till today and the PO didn't know about it either.

Just wondering which brackets went where??? I want to do this for my Pathys. Thanks for the write up. James

I like that setup where did you get that at??? James

Yeah, see if you can get some factory steelies or something like that for the off road tires. I hope to one day have the money for the TE37x's that you have on yours. I really like the looks of those rims. James

What tires did you use as a replacement??? I know the ones on it were more street oriented??? James

Thanks for the real world info on the calmini arms. Appreciate it. Good luck with the swap. James

Looks good. Need to go steal a factory roof rack from the jy for my 87. I will have to start from scratch though, no rack on mine. James

Did you re-index your t-bars? I have new t-bars some ball joint spacers and rear springs and looking to put it all in when the weather gets a bit nicer. James

Hey you never know till you ask. By the way which UCA's are they? and what are your thoughts on them. James

True. Now that I moved my floor mat I felt more of the heat. I went to town and while I was stopped I wanted to pull my floor mat and shake out the dirt. That was when I found out it was melted to the original non carpet area on the drivers side carpet. Kinda freaked me out as I never once smelled anything out of the ordinary. Hope to be able to get this fixed. May have to pay a visit to an old school exhaust guy that my dad knew. He could probably fix me something up custom. Just need to figure out what the best size tube would be. James

Just wondering what you are going to do with your UCA's???? Which lift are they?? How much?? Just wondering. James