MLML
Members-
Posts
52 -
Joined
-
Last visited
-
Days Won
2
Content Type
Profiles
Forums
Calendar
Everything posted by MLML
-
LR 9448 springs (one coil removed) with Bilstein 5100's in the rear, KYB struts and OME springs in the front. About 2.5" of lift.
-
Will post some photos once done. I’m probably going to weld some more support pieces on these to beef them up a bit. Sent from my iPhone using Tapatalk
-
Going on this week! Any advice?
-
I’m going to do manual hubs at the same time. Thanks!! Sent from my iPhone using Tapatalk
-
Just a double check guys. I'm planning to order this Lokka for my 2002 QX4. Any issues I need to be aware of? Part number NIS-FO-293 on the Lokka site.
-
Yep! I put LR springs and Bilsteins on the rear, giving about 2.5" of lift. I have a 2" spacer on the front now, but next week KYB/OME springs with 1" spacer. I have skid plates on now and rock sliders are coming next week, along with manual hubs. Lots to do! I actually bought that QX4 brand new in 2002 and never drove it very much, so it has pretty low miles on it. The benefit of a California car, especially where I live and it's almost always 70F, is no rust, leaks etc. It's technically my 16 year old son's truck now, but I'm having fun working on it.
-
I have a 2002 QX4 with LSD axle. I may start with a Lokka in the front with manual hubs, then do the rear later. Any issues you see with the QX4 variant?
-
Thanks! Probably easier to just swap the axle.
-
Anyone put one in their Pathy? Looking at maybe doing this one in my 2002 QX4. https://www.4x4parts.com/i-18915694-complete-detroit-locker-assembly.html
-
No problem! Thanks for trying!
-
Is there a group buy going on? If not, I will order one off eBay.
-
The QX4 boxed in by Jeeps!
-
-
It took about 2 weeks from the time I ordered to arrival at my door. Great meeting you today! Thinking about the SFD and 6 inch lift......
-
Nice meeting Delta R50 today at Hollister SVRA!
-
I'm in for one of the $50 Chinese snorkels.
-
Hit up Steve. Awesome guy, great product. Sent from my iPhone using Tapatalk
-
California car! Never seen bad weather, basically no rust anywhere. I just changed the transfer case fluid. [emoji1] Sent from my iPhone using Tapatalk
-
I will likely have a front/rear set in the next couple weeks. Replacing front struts and doing 1" on front, LR springs on rear no spacers.
-
Yeah, I just keep a couple extra bolts/washers/hose clamps/zip ties for general purposes.
-
Awesome skid plates and customer service from Steve! Can't wait to skid on them!
-
Land Rover Springs and 5100's in the rear. El cheapo struts and 2" spacers in the front, about to be replaced with KYB/OME HD and 1" spacers.
-
If I plan to put on a metal bumper/winch maybe I should go with the 1.5" spacer?
-
Fantastic! That's what I'll do.
-
The 1" SF spacer would take the place of the Trim Packer? How much lift would I get with the 1" SF and KYB GR2/OME HD's?