micahfelker

Not super great pics plus there’s a bit of a snow bank so they’re not perfectly level but hopefully this is at least somewhat helpful [emoji23][emoji2372] Sent from my iPhone using Tapatalk

Sure! Lemme run outside real quick I'll get one for ya

Thanks man!! It does it's job. I've got a better departure angle than most lifted yotas lol

Custom baby! Come up to Montana and I'll help ya build one!

Some mawl crawlin’ And got the new pathfinder registered today. They’re taking over!! Lol No personalized plates for this one (yet). Some of you may notice the front plate is sitting on the dash, and that is because the one on there right now is held in with some weird kinda flathead screw that only let’s you tighten them but not loosen, so I’m gonna have to drill em out. Sent from my iPhone using Tapatalk

They’re taking over the neighborhood! Sent from my iPhone using Tapatalk

We’ve gotten just a tad bit of snow over the last couple days. This was before I left for Washington on Thursday Anddddd this is what I came back to Sent from my iPhone using Tapatalk

Well folks, to those who haven’t seen it yet, here’s the new Pathfinder! Ended up getting it for $600, and I’ll be driving it back to Bozeman tomorrow and starting my new job at Go Fast Campers on Monday. It’s got a 5 speed manual which it’ll be donating to the red Pathfinder once the weather improves. Also, huge thanks to Alex for the old lift springs! Might as well roll around with a little extra style before the trans comes out! Sent from my iPhone using Tapatalk

I'm pretty sure that the high beams are a different filament in the same bulb but I could be wrong. Honestly I'd just try replacing both bulbs first and go from there. It's cheap and who knows maybe it'll solve the problem.

Dang son [emoji7][emoji97] looking good Sent from my iPhone using Tapatalk

BEEEEFY

I think it'll look just fine with 31's

Oh but the picture you're talking about from way up there in the thread was with no spacers. I put those in later. Got them for free so figured why not. I still can't recommend any spacer that's over an inch though

3/4in level spacer in the front, everything else is right. And yep, 32's!

Honestly forgot about that! Guess I'll make one!

Also, Kent, your info isn't quite right, I've got 32's not 31's. Rear springs have settled to more like 3" now, they didn't stay at 4 for long lol

Also I'm probably gonna be swapping out all my lift springs from my red Pathfinder to the tan one and getting longer ones for the red one. Once I pull the trans from the tan one (should be this spring, or whenever it warms up) I can give my old stuff to whoever may want them. OME HD with kyb's up front and 9447's with ome shocks in back. Probably gonna go with 9448's like @Jax99 has in the back and still deciding on the front

The 9446 is like half an inch taller than the 9447. If you go with longer shocks it's probably in your best interest to extend the brake lines and diff breather tube, but you can get by just fine without them if you aren't gonna max them out all the time

Rig is coming along nicely by the way!! Keep up the great work!

You thinking about welding a hitch right into your bumper like I did with mine? Looks great, functions great, and best off all leaves a ton more room for that departure angle!

Gotta love when the driveway is taken over by pathfinders Sent from my iPhone using Tapatalk

What brought you down there? You're missing out on all the snow wheeling here!

If you're putting them in the original housing I would just go with some LED's. Running HID's in the reflector housing would be basically like running with your high beams on all the time, plus then you need a ballast and all that crap. And they're more expensive. I run these in my car https://www.amazon.com/gp/product/B07BNFXZSH/ref=ppx_yo_dt_b_asin_title_o08__o00_s00?ie=UTF8&psc=1

This looks awesome except for the fact that you can't lift up the rug to access anything in that lower storage compartment without taking the sub box out

I'm not a fan of the automatic in this and have been wanting a manual for awhile, so I just figured what better time to do it than now. I also know pretty much nothing about how auto transmissions work and have no idea how to rebuild it lol