-
Posts
606 -
Joined
-
Last visited
-
Days Won
13
Content Type
Profiles
Forums
Calendar
Posts posted by mickmutante
-
-
I forgot...
What is that "Injector w/ blue or black or purple mark"?
Made in China injectors:
Refurbished:
http://www.partsgeek.com/catalog/2000/nissan/quest/fuel_injection/fuel_injector.html
RockAuto:
http://www.rockauto.com/es/moreinfo.php?pk=5428347&jsn=2
Thanks.
-
Hi everybody...
A month ago or so, I did my commute travel with the pathy.. No problem... After few hours the motor still warm and started the truck... I felt a weird wouble vibration at the engine and after turning off the truck some smell to gasoline... one two minutes.. And went away...
Since then when cold start the engine no weird vibration... On warm start... Vibration and smell to gasoline... A friend told me to use some cleanner aditive for injectors, valves, etc... I used this weekend... When to small trip out fo the city... The way out, no problem, the way back to home... A nighmare... The truck loose power... vibration, etc..
Yesterday I started again the truck, cold start... no problem... Let it warm for half hour... Turn it down, let it cool for one hour... Start the truck, vibration again...
I think it might be a stuck or bad injector... Whent to the mechanic, told me same thing, maybe some ultrasound cleanning would work, in case of dirt...
So if I have to buy injectors... Do I have to buy the 6 pack? What about refurbished injectors? Or made in China ones? Recomended brand?
Over here the price is absurd its like double the price... So i thing i would buy them in the US and send them here...
-
I run 265/70R16 AT tires... No spacers..
-
I nominated: deltaR50
-
Went to the mechanic... I have to change left front bushings... I thing I will go for a full set of poly bushings... Maybe 4x4parts sets...
-
Welcome to the forum!
-
I have 265/70r16 and i go between 34-36psi for urban riding...
- 1
-
-
apple pie
-
Nice ride!
Which Rancho shocks did you install?
-
Some times I get 32km gallon on the road or highway... At the city with terrible traffic jam I get 19km gallon ...
-
I have been using the ingalls one (81260) since 2009 now and they have been great.
Same here.... Ingalls camber bolts, with 35mm coil lift and 265/70r16 tires... They work great.
- 1
-
menu order
-
Nice ride!! Welcome!
-
So..Ive got an 03 pathfinder everything is stock. Door frame says 255/65/16's But has 255/70/16s. I'm installing new KYB stocks and struts. For price purposes a 265/65/16 is cheaper than a 255/70/16. Do I need any lifts or mods done to fit the 265/65/16's?
You can use 265/70r16 without problem... Well, maybe you will have small rubbing in reverse at full turn.
- 1
-
Changed the 4x4 green light indicator in the dashboard... lost 2 bolts during the process...
- 1
-
-
Gold Member
-
I just found these too, less price... Suggestions?
vs.
http://www.4x4parts.com/i-18914449-pathfinder-split-design-trailing-arm-bushings.html
-
radio gaga
-
Thanks for your advise!
I thought it was going to be easier to find the bushings here (Bogotá)... I only found bushings for Toyotas and Mitshubishis... Pathfinder R50 poly bushings are like a very rare hard to find pokemon... Hahahahah
I think maybe i cand find some Nissan Patrol bushings... But i do not know cross reference or campatibility with R50...
Which seller has good price and quality in the US for poly bushings? I need to send them to NY... I will be there next week visiting my sister...
Thanks!
-
False alarm
-
I think my driver front A-arm bushings are damaged, son I have to change them. So I am planning to change as many bushings I can i my R50 2000 Pathy, front and rear for polyurethane bushings...
I looked for local manufacturers and found a good one, for really good price (Australian an US were out of my budget beacause dolar TRM vs local peso).
I talked to my suspension mechanic about the change and he sugeste me to buy original Nissans bushings, not poly. He told me that non Nissan rubber bushing will cause squeezing sound and will not last to much... And poly bushings were too hard to the truck and will cause damage on the upper and lower control arms... He suggested that it was better to change the a-arm instead of putting a poly or generic bushing...
Is that true? I mean, I have read lots of comments about poly bushings, that they are stiffer on the suspension, but to cause damage on contro arms or a-arm?
Thanks for your comments...
-
mountain man what all kind of lift do you have done to your truck
Me?
I have 1,5" front and rear springs, planning to add 1" spacers on the rear.
Another new forum game - 2 words
in Off-Topic
Posted
Apple cider