-
Posts
606 -
Joined
-
Last visited
-
Days Won
13
Content Type
Profiles
Forums
Calendar
Posts posted by mickmutante
-
-
I did 1,5" coil spring llift... And bought Ingalls Camber Bolts (14mm) 81260...
-
Welcome!!
-
Welcome !!
Post some pics!
-
Due to small variations in actual diameter from one tire brand/model to another, it's likely that there are some 275/70x17 tires that would fit and some that wouldn't.
I think you mean 265/70R17...
I read on the NPORA Faceboo page, I guy how used Coopers 265/75R16 A/T tires, or something similar... They where just there... Few millimiters away from the strud... He had to change the tires (from normal use) and bought the same tires 4 years later or something... The new tires, same reference were rubbing the struds.... As Jyeager says... Some tires would fit and some that wouldn't....
-
oil quarter
-
Yes they do well.... I think the front console lights (reading lights) are not to bright... I think they have 120 lumens... I am going to buy some with 180 lumens. ...
-
-
-
I have been claying (clay bar) the Pathy.... I have finished all the sides and hood... Still missing the roof...
-
Thanks for the tips
I was thinking to remove the fuse before installing the leds, to avoid some short circuit, just in case... And then re-install the fuse... Maube i did something wrong, a short circuit touching the base plate or something....
Before i intalled the led bulbs, firs time, i did test them.. They were all ok... After the short i re-test them... They were ok... So that leads to a problem with the install process... Again... Maybe a short circuit.... This time i am going to be more carefull
-
If an LED bulb is blowing fuses, there's some other issue and increasing the fuse isn't a good idea. I'd be sure that the draw on that bulb is quite low...much lower than the filament bulb.
Got any pics of it installed? Is there any noticeable short? Does the fuse stay intact with the original bulb?
I have installed these... I remove them and re install the old filament ones... The fuse did not blow.
I bought them on ebay two moths ago... I cannot find the link on my ebay user page, it is harder to find waht you bought on ebayWhich interior bulbs are you changing. Cam you link to which ones you purchased (all though sounds like I don't want those ones lol)
I test them with a 12v sourse and test continuity and they are ok...The led may be shorted internally itself. Test for continuity
-
Drink vodka
-
-
-
Over here we do nota have JY as in the US...
So i was looking for the Box Assy-Luggag, CAP-ARMREST, SEAL-HOOD FRONT, and other small parts... And I found https://www.nissanpartsdeal.com and http://www.megazip.net ...
Megazip ships to Colombia with a reasonable price... Nissanpartsdeal ships over here but its way to expensive ( I will have to ship to NY to my sisters house)...
Has someone bought from one of these sellers before?
Thanks.
-
Free donuts
-
-
Try to put my daily drive wheel on the spare tire space... And did not fit...
-
^^^ As LittleFR said...
I do not have rust on my pathy... So no experience with it...
Welcome to the forum and have fun.!!
Do you have pics?
-
First time doing engine bay cleaning... I went to the local shop and buy and engine degreaser... I think it went well, at least the pathy start up without problem... hahahahaha
- 1
-
Today I went to emissions inspection/"technical test" for the pathy... And was ok... Inspection passed.
- 2
-
BFG's were on super sale w 4wheelparts a while back. Free shipping, no sales tax, 50 instant rebate on a set of any 4 tires and another 50 instant rebate for buying 4 BFGs.
I would love to buy them on rebate, but I do not live in US... I am looking for rebates over here...
-
I want to change my FireStone Destination AT 265/70R16 in the near future....
So I was reading abou AT tires and all that stuff... All the reviews I have found (still reading) are about Tacomas, LandCruisers, Jeep, etc... but not Pathfinders...
Wich could be a good chice.... BF Goodrich KO2's or General Grabber at2's?.... I would like to go with 265/75R16 but I thing I would need to use wheel spacers and maybe some triming on the plastic parts... So that is a NO NO... (my wife does not want me to trim anything on the pathy... )... SO the choices I have for size are 265/70R16, same size I am using now with FireStone Destination... Or 245/75R16 almost same diameter (KO2's 30.6" vs AT2's 30.5").... Maybe better fuel economy vs off road grip?....
Thanks.
-
Welcome to the forum and have fun!!
I have 1.5" coil lift on my R50 2000 Pathy and 265/70R50 AT on it for now... I think it work well for now....
R50 projects on the web
in 96-2004 R50 Pathfinders
Posted · Edited by mickmutante
Just in case, I just found https://sites.google.com/site/r50projects4free/home
I'm thinking on doing this one... Long term project...