thorpe991
-
Posts
579 -
Joined
-
Last visited
-
Days Won
1
Content Type
Profiles
Forums
Calendar
Posts posted by thorpe991
-
-
I GOT THEM
im so happy but i have to get new tires for my other rims before i put them on cuz the ones i have on now and are my winter rims and they are old chevy truck rims with a 2" or mabey2.5" bore hole 
-
Yep i planed on using the stuby ones and on my buddys nissan truck (i think hardbody) to change his i used the t handel and had no issues so i thought i try it
Sent from my LG-LS840 using Tapatalk
-
so i went back about a week later and they were gone but there was another r50 with mile marker hubs i tried to take them off and broke my cheap t- handle multitool thing that takes bits so i was wondering what is the size hex wrench (cant think of the name) thing do i need? the cheap set i have doesent have sizes printed on the bits i plan on picking that size up as a socket style so i can use a ratchet
-
last summer i had someone taking stuff from my garage. so i scared the crap out of them with my old truck the next time they came around because the stuff would always go missing on a saturday night pretty much i hid in my truck and when they came into my garage i fired it up with the peddle to the floor iv never seen anyone jump so high or run so fast and i havent had anything come up missing since my truck was a k1500 with a 350 aftermarket headers no cat no muffler and 2 1/2" piping it was ridiculously loud and it didnt have enough back pressure so it would pop and crackle when reved up and let off if i went to high rpms it would backfire and sound like a gun shot ,thats what it sounded like when i let off the peddle that night
-
If your looking for a budget friendly roof rack (not on your list i know) walmart sells a universal RR for a hundred bucks
Sent from my LG-LS840 using Tapatalk
-
Actually it is possible to fab a drop of one inch. I did it. Allows the use of strut spacers for more ground clearance.
when you did this did you have to make a steering extension? at the moment thats the only thing stopping me from doing a sfd of 2" on mine is that nobody makes a 2" extension and kryofab (i think thats it) only makes i think a 4" and 6" drop
all im looking to get is enough space to fit 33s right now im running 32s with 1.5 spacer on the front and rub when full crank so a 1" diff drop and bigger coil spacers would allow me to have the height i need
-
i have a Le and my 4x4 lever is on the floor not a dial on the dash and the only difference iv noticed between le and se is that most se's are manual while most le's are auto and most les have power everything and leather i went to my local jy looking for parts for my camaro but had to check out the new pathy they had
it was a 1997 se and the only difference i seen with out tearing into it is it had: 1 cloth 2 manual trans 3 non wood trim 4 no outside door trim 4 had fender flares -
i like trails (only spot iv had the pathy) haven't been on rocks yet and i love mud
-
1
-
-
i dont know if mine goes that far up but the spot to the door just started last week so it might soon
-
iv found that the p245 75 16 or the p245 70 15 to work nice as they are close to the same size as a 31 but much narrower the 245 70 15s are hard to find though
-
so i went a looked at it yesterday just for the fun of it and it is super clean i dont think its ever been driven for more than a few miles at a time after the build but the odometer said 70xxx
-
Would any one like a Cadillac el camino? (http://elmira.craigslist.org/ctd/4391781588.html)
-
so i think this is my problem also so what is happing to me though is that when it rains/i wash it my head liner on the passenger side gets soaked just around the right rear corner of the sunroof and by the door on the passenger side
-
thats for the xterra with the 3.3 v6 also dated the same
-
ya that was for the r50 headers
this is from the site so (This product is estimated to be in stock on Monday 07 April, 2014.) so the 3.3 v6 frontier headers are in production i was wondering if they would fit r50s i guessing there must be some sort of clearance issue for them to be just for the frontiers even though they are for the same motor
-
so i was looking at rugged rocks.com and found this ( https://ruggedrocksoffroad.com/nissan-frontier-d22-headers-by-doug-thorley-33l-v6-1998-1999-2000-2001-2002-2003-2004-p-6020.html ) that they are selling soon. would they fit a r50 pathy with the 3.3 v6?or would there be clearance issues?'
im guessing by looking at the pics we/i/people would have to use universal cats and have a spot for the 2nd o2 sensor to go and would have to figure out the wire length
-
Now, the real question to be asked is what kind of HP and torque is it putting out?
B
exactly what i was thinking
-
how did you get yours to start with those lines off (idle air and the valve cover pipe thing) if i have ether off mine wont start it will fire and if im on the gas itll start but stall out as soon as i let off the gas and if the idle air one comes unhooked wile idling it shuts down to
-
right now i have 1.5" spacers on the front and 1.75" in the rear i am able to fit 32" tires on a 15" rim and i rub at full crank i want to put 33" tires as they are cheaper than 32" tires (more common size than 32") i am thinking off doing a 2" sfd and keep the 1.5 spacers in the front so i would end up with a total of 3.5" of lift.
im wondering would 3.5" of lift be enough to fit 33"s (i dont mind rubbing at full crank) and should i get a over all 3.5" spacer for the front or use a 2" spacer and the 1.5" spacer i already have? i have the solid polyurethane ones from a member on here so would i be able to put fleurys spaces on top of the ones i have? (i know when you block lift a older solid axle with leaf springs its bad ju ju to do multiple blocks but not sure about this)
last week i tried to fit 33" tires on 16"rims that my buddy has and they fit in the wheel well i just couldent turn more than one rotaion of the steering wheel ( i ripped the mud flap off the driver front fender
) -
on my 97 (3.3) the only stock piping is the tail pipe the rest has been replaced with 2-1/2" but the tail pipe is stock at 1-3/4" i had to put 2 down sizers on the outlet of my muffler because i was dropping from 2-1/2" to 1-3/4" and couldent find one that droped that far so i have a 2-1/2 to 2 than a 2 to 1-3/4 to get my tail pipe to hook up but from my cats to the muffler its 2-1/2" and i used a single in single out because the PO had it replaced and had custom pipe cut and welded to do the y ill get a pic of it today (the y)
-
if you hit the cats on stuff it can break the comb loose and turn and act as a clogged cat it happened on my camaro but thats cause the catonly sits 2" off the ground (the cat is visible from under the car when looking at the passenger side the actule body sits about 4-5 " off the ground so any speed bumps and im hitting the cat
-
my vg33e has two cats that bolt directly to the exhaust manifolds
-
Don't know the exact dimensions, but here's the video:
mine sounds about that but a little bit quieter
-
i plan on just taking the plastic off like 01silverpathy did and zip tieing the turnsignales to the metal or making a bracket to jhold them to it and then puting a peice of metal to form a skid plate sort of
What genre of music are you into?
in Off-Topic
Posted
country rap rock hick-hop i was raised on Metallica and hank jr so i like anything from skynerd to slayer except the beatles and from hank sr to colt ford/ the lacs and only old 90s/80s rap like nwa dre ice t ice cube snoop but i am a bass head and love dubstep i have a 12" sub powered by a 1000watt mono amp in my pathy and 2 12" subs powered by a 1400 watt 2ch amp in my camaro