-
Posts
579 -
Joined
-
Last visited
-
Days Won
1
Content Type
Profiles
Forums
Calendar
Posts posted by thorpe991
-
-
Old pic from last spring
-
Iv got a set of 31s on 15x10 wide rims and they dont look strechedLooks awesome! Those rims are 10.5 wide? I'd think the sidewalls would look funky (kinda like the ones up against the wall in your garage) if the rim is the same as the section width of the tire.
-
Are they 15x8 or 15x10?
-
Haha yep but this winter im putting the motor and tranny from one to the other so i have a close to show car got the first one 3 years ago and the body is shot bought the new one last week and body is perfect but it dosent have a motor or tranny
-
Nope but i just bought a 86 camaroNo it doesn't. They just tell you that to make you feel better because you have a 87 Chevy Camaro...
Just out of curiosity, do you have a mullet?
B
-
Well i was going get a sentra but i found a roller 86 iroc for 1500 that only needs a motor and tranny so i think that will be my route
-
Which one is the tranny in line?
-
with my green lights in
Thinking about getting green leds for it
-
Took mine off to replace wires and i had the surround problem but i had that problem on the replacement one from rockauto so
-
Yesterday i replace rear coils and shocks and today i replaced front coils struts and cvshafts
-
I just used it cause it shorter than the full word
-
Just looking to see if there is a major difference in the parts like trim or body panels ect
I bought these from a jy and noticed they had jap letters on them while my stock ones do not are they jdm?
This is the fabric of the one with the jap letter
my stock panel
Stock letter
-
What's the difference between the usdm and jdm fenders?
-
If yours is a r50 no the hardbody is the same as a wd21 if they are frontier fenders then maybe
-
My next.step is to find clear turn signals for her
-
Haven't found them with black but its nothing a lil tape and spray paint cant fix
-
This is the new clear lense has the same brand and dot certification
And here is a some what full front shot of my pathy
-
So this is the factory ome replacement i got from rockauto when i first bought the pathy
As you can see it says depo and has dot certification
-
Yep if i.can get my phone to pic it up ill try and get the name band and dot thing
-
-
this is on my 97
-
http://pages.ebay.com/motors/link/?nav=item.view&id=331203614804&alt=web
So i ordered these and received them in good time they fit perfectly they have depo molded into them
i had a stock replacement with the same name on it so there quality they include 2 amber bulbs there are only for non face lifted pathys just thought i would share what i found
-
Thank you !!Those are what I have , I also did all new calipers , pads , and rotors and they fit fine .
They will fit over the manual hubs .
-
I am running 15x8 ProComp's on mine with the exact same specs you are considering. I had my brakes, rotors, and calipers replaced since the wheel swap and did not have any issues at all. I too was concerned and warned the mechanic that was doing the break job of the possibility of clearance issues. He carefully mounted the wheels and claimed that he didn't detect any rubbing. I'll admit, the calipers are really f'in close to the wheel though!
are these the ones ? http://www.summitracing.com/parts/pcw-51-5883f/overview/ i am planning on buying these but it doesn't say what the center bore is and im running manual hubs so will these clear the hubs?
Street/Strip vehicle suggestions
in Off-Topic
Posted
Only thing you have to watch for with 82-92 camaros/trans am is frame twist an stock 350 with headers have been able to do that