CNAM
-
Posts
1,617 -
Joined
-
Last visited
-
Days Won
8
Content Type
Profiles
Forums
Calendar
Posts posted by CNAM
-
-
Yanked my seats out. Removed my sub woofer box and 2 12's to completely shampoo 14 years of dirt, spilled soda, crumbs and loose changed from underneath. Have a portable bissel here at the house. And it works bomb. Plus a heavy dose of hot H2o and OXY Clean!!
-
I have heard RockAuto.com has some pathy springs. I use to have Automotive Customizers +2" springs all the way around. I still have them in front and run modified WJ +6.5" coils with adapters in the rear. Currently on 35's. The AC springs came from 4x4parts.com.
-
Catco.com has them for us. Slightly cheaper. Esp if you are not in CA. Is it for sure not just the o2 sensor?
-
I did these check em out.
-
-
I had a bad exhaust related buzz/vibration a while back. I ended up doing the entire exhaust but the noise was coming from inside the muffler. Best way to check is to crawl up under that mug and have a look while a friend you trust gives some revs..
-
1
-
-
Removed some very much unwanted stock BS components from under the trunk end of the truck. Also reconfigured my EFan to run as a secondary rather than a primary. Followed by a coolant flush and change. No more "Ching-a-Ling Bling Bling" sound from under the truck due to an abandoned spare tire holder rattling around like TwoChainz
.. Rear bumper you my dear friend are next to go.
-
Same as mine (removed). But I have no problems because of it. I do not believe it throws any codes for the engine light. Do you have access to an OBD II scanner? What codes are you getting? May be something unrelated..?
-
Welcome! Nice. Looks like LE? Mine is 2001 SE.
-
I'm thinking Gorman this Sunday. Planning on doing the Miller Jeep Trail. Along with a buddy and his Heep.. Anyone interested in tagging along is more than welcome. Come Get Some!
-
MISSING LINK
SKID PLATE
-
Made my front end a "Missing Link" cross member for the SFD. And got my skid plate cut and bends made! Just need to drill mounting holes and put it on tomorrow. Pics will follow completion.
-
I'd have to say these questions should be directed to SteeevO @ RuggedRocks. He will know the answers.
-
Alignment done this am. A while back I noticed an inconsistency in the RPM while holding the throttle at approximately 1700-2200 RPMs. It would gradually climb to the noted range then bounce down and back up consistently.. Going to flash the ECU this afternoon at my buddy's shop. As well as replace the tranny mount.
-
Blasted some welds on my SFD in the front end. I HIGHLY recommend this for anyone running this type of setup. Truck feels way more sturdy up front. Going for alignment in the am!
-
Blasted some welds on my SFD in the front end. I HIGHLY recommend this for anyone running this type of setup. Truck feels way more sturdy up front. Going for alignment in the am!
-
I plan on going with 4.875 gears from Nismo.
I think the 5.143 or 5.857 would be too high a gear unless you are building a straight rock crawler/ off road rig. I still want to be able to go 80mph on the freeway. Parts are about 1000$ for both sets front/rear. Plus labor and master install kit maybe 150$. I plan on going big! Gears and lockers when the time comes...
-
Depending on which engine your truck has and also the stock gearing. Mine is an '01 VQ35DE with stock 4.3 gears. Plans are to to re-gear soon. But for now seems fine on off freeway speed/power seems fine. Just more fuel thirsty with the 35's.
-
Pick up the May issue of 4Wheel parts "Off-Road Adventures" magazine. There is an article/profile and history of the Flowmaster company, products and applications.
-
1
-
-
-
I love my Flowmaster.. Dual in/out setup(VQ35DE). They have a wide variety depending on preferred application. They are west coast easy to talk to if you have questions... Then again I have heard lots of Magnaflow for this VG33 you speak of..?
-
1
-
-
Oil change, new filter and these are the plan for today.
-
Oil change, new filter and these are the plan for today.
-
Recharging my AC today. As it's been over 95° here the past three days in a row. Good news is the Efan is keeping the engine cool in the heat. And replacing front wheel bearings, inner/outer and races. Also going to pull my door side rear view mirrors to repaint the moulding part as they are peeling some..
What did you do to your Pathfinder today?
in The Garage
Posted
Got my trans cooler. Mounted it. Going to wire it up and run the lines tomorrow.