-
Posts
1,617 -
Joined
-
Last visited
-
Days Won
8
Content Type
Profiles
Forums
Calendar
Posts posted by CNAM
-
-
So this afternoon I plan on changing out my front sway bar end links and sway bar frame bushings. I have been hearing some unpleasant sounds from the front (as well as the rear) rattling, clanking, metal 2 metal, popping... etc. Looks like the replacements are easy to DIY..? Any thoughts, comments or suggestions. Is this as straight forward as it seems to be? Is there anything I should be aware of before starting? Do I need to adjust the camber of the front wheels as part of this repair? Will disconnecting the old ones cause any unseen trouble? Thanks! -CNAM
-
Transmission is probably fine. I changed the TPS on mine and resolved this issue. Mine was also neglecting to shift and would bounce off the rev limmiter when taking off from a stand still (first gear). I changed the TPS, Mass Airflow Sensor and fully took apart the throttle body and cleaned it and cleaned the K&N air filter. This seemed to do it for me. I am now dealing with an ignioion coil issue. It helps if you can get the codes from the ECU.
-
I'm DOWN!
-
Im dealing with this problem currently.. I have changed the #1 coil and have ordered the #2.. Waiting till payday to order the remaining (4) #3-#6. I am hoping this will prevent the check engine light from returning due to P1320 code. Any thoughts, comments or advice would be much appreciated.
-Thanks. CNAM.
need help with lift
in 96-2004 R50 Pathfinders
Posted
Automotive Customizers out of Florida sells a kit. Its basically all (4) 2" lift springs, struts for the front and you can choose from three different shocks for the rear.
https://www.4x4parts.com/nissan/pathfinder-19962004-pathfinder-c-435_437_341_8.html
https://www.4x4parts.com/nissan/pathfinder-suspension-package-p-1551.html
You will need the camber alignment kit x2.