CNAM

GoPro!

sweet!! I need to get one of those lol

........'s Badazz!!!

64gb!!! What're you trying to do, run NORAD? :-)

Also, get a Lifeproof case for it, I love mine!

I've had the lifeproof case before.. It's pretty cool but I'm going with the element case for this one! Sector 5 carbon fiber.. Looks siiick!

I highly recommend discos. You really need sway bars in emergency type maneuvers, not cruising the street. With Disconnects you'll still have them on the street. And how long does it really take to disconnect them?

If you tow at all I would recommend disconnects or just leaving them on.

I removed the rear and keep the front.

And that is?

http://www.hopposonline.com/

Contact: ALEX

I have a friend here in San Pedro/Long Beach that can make custom ones too!

What fans are you getting? I had a few cooling problems until I installed a Ron Francis Wiring temp control module, works great now!

I'm getting a Hayden rapid-cool 16" *HIGH FLOW* electric fan with a thermostatic wiring switch kit. Also from Hayden. About 150$ all together. Picking them up today.

I use an altima fan currently with thermostatic switch, but will be upgrading to the ford taurus fan which is sitting in the trunk now, just need some time to install.

Where did you order the bushings from?

Ebay.. 26$ for both. Free shipping.

bestbuyautomotiveparts

bestbuyautomotiveparts

Detroit Axle remanufactured Rack and Pinion 170$ free shipping and lifetime warranty. Plus includes shipping label for core exchange on the old one and they will send me back 20$ or 25$to my paypal.

LMAO

Great idea

I'm pretty sure it is costing me more at this point to be single...Keep buying expensive truck parts!

Post a pic!! Did you get a bar or individuals?

you forgot camera and action

Ordered a bar, fogs and top side floods.

Im by no means an expert here, all my knowledge is coming from reading posts in the forum when I was making the same decision for my 95. From what I understand the 2001 has drive flanges instead of auto hubs, which act like locked hubs 100% of the time. By installing the manuals you wouldnt be spinning your cv's all the time which will give you a little less rolling resistance and maybe a tiny mpg gain. More importantly it will reduce wear on the cv's lengthening their life which i...

All of the above plus extra gas mileage. I've never regretted putting them on my 96.

You didn't have to remove the throttle body, just the air intake tube and the IACV which is secured by two Phillips head screws.

I've done it soooo many times already I think I can remove the throttle body and put it back on with my eyes closed... Codes are still gone!!! WootWoot!

What about your exhaust made the stock carrier inaccessible?

I ran the dual tail pipes where the stock tire carrier holds the tire under the trunk... I'll pm you a pic.

Where is it?

I'm out in Colorado til mid April... It's home in LBC.

Bumpers? What sort of bumpers?

Homemade tube style front with winch plate, light mounts and stinger. Rear wrap around double reinforced tube style with integrated hitch receiver.

Don't forget a filter!

Did mine a long time back, B&M High Flow. You won't regret it!

Pics? Vids?

postponed.. friend was sick. so I stayed home and worked that weekend. Maybe soon!

Interested. Keep us informed.

Will do.. In the works.

Congrats! Let us know how it works out after the mods.

you wont have to mess with the camber, i had to cut one of my links off because it was seized, use lots of pb blaster and should be good to go!

What other option is out there? Contour shut down, and everything else doesn't even get close in terms of quality and ease of use!

& to you bro!

*Pant* *Drool* *Drool*!!

You and I both!

Yeah dude, where ya been, you need to update us on your rig...

Welcome back!