enkrypt3d

Um so the 3 pints I bought of this wont be enough? http://www.amazon.com/gp/product/B0007QGT34/ref=oh_details_o01_s01_i00?ie=UTF8&psc=1

Rear H190A - 3.1 pints (1.47 liters) C200 - 2.75 pints (1.3 liters) H223B - 5.85 pints (2.77 liters) Which diff do I have on my 95 XE? I'm pretty sure its LSD... so C200?

The motor with oil.... pepboys put in 6 quarts - I had them remove 2 quarts and it still reads on the "H" mark on the dip stick....

I called 2 different Nissan dealerships and one told me 5 quarts, one told me 4 1/8th quarts and the service manual says 3 1/8th quarts...... which is it for my 1995??

http://www.nicoclub.com/FSM/Pathfinder/1995_Pathfinder/ Service manuals for 95 pathfinder - go up a few directories to find your specific model!

So I'm guessing it would be bad if a shop put 6 quarts of oil in my 95 motor huh...........

How much do I need for my 95? 3 quarts?

http://www.amazon.com/Royal-Purple-Performance-Synthetic-Automotive/dp/B0007QGT34/ref=cm_cr_pr_product_top Would I need 3 quarts of this for my LSD? Thx

It seems like the diff is locked - any idea on how to get it unlocked? And should I use the same oil in the front diff like the rear? Or no? Thx

I'm pretty sure I have an LSD - I did a burn out in a gravel parking lot at full lock and left 2 tire marks in the gravel so its LSD - even though there's no yellow sticker. I'll have the fluid changed out next time its in the shop which will be soon to replace the front calipers that are leaking, distributor cap & rotor. I'm hoping changing the fluid in the rear diff will get rid of the weird vibrations when reversing... but it only happens when turning which leads me to believe its the diff. To inspect the ball joints in the front, whats required? How much stuff do you have to remove? And to lube the sway bars, where did you apply the grease? on the drop links? That seems like where my clunking is coming from....

So I just replaced the rotors, pads, drums, shoes, springs, shocks & sway bar bushings and one thing that I thought was fixed with new brakes all around but its not - When I'm backing up and turning (without applying the brakes) there's this shuddering / dragging sound coming from the rear of the truck. I thought for sure that it was the old rear brakes but these are brand new..... Also when I go over bumps with the new shocks there's this squeaking noise in the front end - I'm guessing something needs to be lubed? Spring mounts or something? Thanks!

I noticed there's a crap ton of leaves just behind hood - the little holes with the hood open just big enough to put your finger in, I can feel that there's at least 2" of crap in there... is there a way to get to that stuff? I guess I'd have to remove a body panel to get to it............ I haven't had to use the heater but once but I'm sure there's crap near the heater core too....

Epic bump - are there any better aftermarket automatic locking hubs that I can get for my 95 XE? I'm not a huge fan of the manual ones....

Anyone have a manual for a 1995 XE Auto? Thx! http://www.nissan-techinfo.com/deptog.aspx?dept_id=36 Found a useful link

haha I've always wanted to do this... would it look ok? I would keep the seats and take out the carpet and cover the backs of the rear seats and floors in spray in bedliner... what you guys think? Am I crazY?