MAXEDpath

JEEZ come on guys, I bet it farely quick its not that hard.... or maybe i just got to much experience from playing games like this at school all period during computer tech??????

DOTA- Basshunter

LOOKS AMAZING!!!!!!!!!!!! I'm so jealous right now dude... Question for ya though how much $ are you in on the lift so far??? and I'm sorry bout not getting back to you about the missing link I've been really under the weather for the last little while...

yep great job John!! It's great to see someone going full time on r50 pathy products and can't wait to see what yall make

and yes its just my front markers cuz my tail markers and dash lights come on its just nothing up front works the markers dont come on and i cant turn on my fog light when i have it set to markers either

Alright I will have to check that out and see if it works for me

Alright guys I noticed today when I went to school this morning that my front Markers don't work along with If I can't turn on the fog lights either when I have it set to markers??????I checked all the fuse and relay stations and I can't find anything that has to do with front markers????? Whats wrong??? I need help!!??

Well guys, I'm at school and I have yet to understand why they won't let us on sites such as this???????????? and im surprized how many members are on right now.....

Ya After Jackson made his post It gave me come more things to think about what I need and should do

we need something sooner than 12/21/12 cause by then i will forget about it

Milling out a small amount of material to clear the socket, as so in the picture below I then remounted the crossmember to make sure it still fit and tightened fully and went for test drive. I did notice right off the back that body roll was reduced I then removed and spray painted primer base and gloss black coating on for rust protection

Well guys, Since it was labor day weekend and I wasn't going to be doing anything I decided to go out and make one so here is my write up.... passenger side lower a arm mount with bolt out, 1-1/2" inch square tubing is the biggest that will fit bolts out on both sides I reused the bolts (long enough. 1-1/2" square tubing at 23-3/4" is what I used. I decided to just cut the tubing at angle instead of welding two mounts to attach it, which increase's strength Drilling 9/16" mounting hole test fit of the cross-member, upon tightening I noticed I couldn't fit the socket in

hmm...good idea might have to check it out a little more

I've been keeping track of my mileage since I got my pathy and when I went and filled up yesterday when I did the math I couldn't believe it so I checked it again... AND ITS THE TRUTH I almost got 19 mpg with my pathy and yes it is all stock but usually I'm getting 15-16 but this was just amazing (to me)

where did you guys mount your racks to???? thats the only problem I've had in my plans so far is how to attach it??????

Ya just these last couple days with it getting Very Hot inside during day and down in the low 40's at night I noticed and both of my rear doors the seal keep coming off so I finally decided to break out the epoxy and solve the problem for now

Going to make one in my welding class once I get all the safety registration and general skills test done

Very nice

I think its about time I really get involved with the trail clean up and reconstruction groups around here

I'm glad so many of you guys actually go out clean up and repair the trails... To hear bout how people are involved in saving the trails/land makes me happy

well I'm talkin like with a flat bar or something showing how far it drops and with measurement

Post pics when you guys get your installed

Very good I think I might end up makin something similar to this cuz it is a great idea and ty01pathfinder that sucks

I wish.... HEY GUYS POST SOME PICS WE WANT TO SEE