adamzan

K thanks for the advice im very busy this week but i try to start the motor and let it move around a little bit just so nothing seizes. oh and what kind of cranking amps do this pathys need to turn the starter, because this battery i think is for a smaller car and thats why i didn't get to many cranks out of it (my dad let it sit for the winter without even starting it and the other battery froze to death) Im not that mechanically inclined so thats why my friends are helping me with my frame lol. Also im only 17 so its also a project truck for me.

I will do as soon as i get time. Also is it ok to move it around the property in its condition? so far i just go really slow and try to avoid braking to reduce stress. oh and is it common for the crossmember to fall off on these model years?

Its only like 100 feet give or take away from the garage, so im gonna try to boost it when my buddy gets back or we'll just pull it with his car.

Ill tell you the story of what happend. The guy who owned it before my dad was a nut and he decides one day, hey lets go mudding in a farm field, im all for that too but he never cleaned it and that was over 6 years ago so when my dad bought it he never knew of all the crap that lingered inside. There was more in there but a friend and i have managed to clean alot of it out. Also i have gone around to the whole frame with a ball peen hammer and whacked the daylights out of it and i found all the rust holes.

here are the pics, sorry i couldnt figure out how to put them directly on the forum http://img437.imageshack.us/img437/5540/im000562rw2.jpg http://img437.imageshack.us/img437/1140/im000563me5.jpg this last one is just a pic of the poor old girl now, not much body rust. http://img437.imageshack.us/img437/4762/im000565ct9.jpg the best thing is i got it for free, from my dad

Is there an easy way to fix this temporarily so i can move the thing into the garage?

I was going to attempt working on my frame yesterday and when i went to start up the truck it was idling around 200 very roughly and was shaking alot. Also since the idiot mechanic that my dad (who had it before me) took it too welded one of the muffler(still original 94 suprisingly but it came loose) hangars to the frame crossmemeber it was making a horrible rattling noise. Anyways the gas gauge was passed E and I knew what had happend, so i got a jerry can of gas and put it in. I go to turn it over and it turns over like 5 times and then the battery crapped out on me. I haven't tried to boost it yet as its being stored at a friends house, but how many more cranks will it take to get running again? and should i put even more fuel and some STP or something in the tank? Oh and the reason i was moving it was because its not in the garage at all times, but in the back behind some trees

Check your crossmember right where the rear tire is, mine was making funny noises too, turns out it was the broken off crossmember hitting the differential. Not a pretty picture but im still working on finding a solution to my problem too.

like mine probably did, but im gonna fix the thing

I'll try to get some pics of it next time im out. Thanks for the replies though

Yea i thought about doing it myself, actually alot of my friends volunteerd to help me but I called a shop and told them exactly what happend and they ballparked 200-500 maybe more. Its a good truck though! It would be a shame to junk it just because one part is bad.

The rear frame crossmember broke off, body in really nice shap and so is the rest of the frame exept in that area, not to many miles, clean running engine, but i do live in ontario so... Yeah anyways how much would't it cost to fix this, I don't wanna junk this truck because it looks real nice and runs real well.

Actually right down the street from my house is a truck centre and they work on big rigs, ambulances, school buses, and they also sell and service international's. Im gonna go talk to them after the easter break. We got that pathfinder running after 6 months of sitting and it still runs like new. But sadly it leaked a little bit of oil. thanks for the suggestions adam

i couldn't find any other posts about the broken off crossmember so i guess im gonna have to take it to a shop

My frame cross member broke off on the passenger side. I checked the whole frame with a hammer and the back near the tires is the only area where there is rust. I really like this truck as my dad gave it to me and it has many memories from trips and such and I really want it to have as a daily driver again. could you advise on how much repair might cost. thanks.