Vsicks Pathy

On, what about in?

I don't know about putting a new donk in but a head gasket isn't too hard to fix.

Eye it up and you should be pretty close to the mark. That is assuming the ground is perfet.

And the pics were just a bit of fun.

As the last two posts suggested. Nine times out of ten it is the solinoid that sticks, not the starter. Give that a bash and you may get years more out of it. It happend to one of my other cars once.

Better still...

Is it a 6 or a 4cyl? The Navara/Pickup/Hardbody (all countries covered) head lights or any other lights for that matter, will not fit into a Pathy. ALL external lights! Do not be told otherwise. The guards/fenders/wings (all countries covered) on the late model pickups will fit but not early ones. Doors will fit from the pickup to the Pathy and vice versa. I actually prefer the PU doors because they have a butterfly window. Seats, front only of course and all dash compontnts as well as air con and heater unit, you get my point, are interchangable between the Pathy and th PU. So, you have a heap of readily available spares and a nice rare car. How lucky are you? It is the queens holiday weeked, and for some it goes for 12 days. That might be why you have not heard back from the Aussie site.

Your are not, and have not been bashed for doing what you are doing. It is a fallacy to even suggest such a thing. Shame on you. You have been given, what many would deem to be, suggestions of better options that are available to you. Options that WILL save you money. That WILL save you time. If you chose not to take them, fine. We put up with a lot of mundane posts from you so please do not say that we are bashing you. That my friend, is just wrong! And what I said I stand by. The more you remove from that car the worse it gets. I find it hard to believe that the people (friends or no friends) are sticking to a single price even after they find more and more stuff wrong. You need a new chassis, no ifs buts or maybes, yet the price doesn’t alter? I don’t get it and I hope that you don’t get it….. a surprise bill that is, for all of the extra work that was done. That is my fear, and the chances of that happening, experience says are pretty high. We have all wished you good luck, even though we do not all agree with how you are going about your project. Your car is NOT a group project. It is your project. Share with us the progress of the rebuild. Tell us what driving lights YOU chose to put on. Send in a picture of the bullbar YOU chose etc, etc. Then if you can’t wire up the lights, ask for help. If you do not know how to bolt up the bullbar then ask for help. All we have tried to do here is help. You can’t see that? As for you wanting sponsorship? What do you want? Do you want money to do your project?

I wonder if you are only going to get what you paid for?? I've had enough of this particular topic.

If you have a LSD then you will stuff your diff up pretty quickly. You can use different size tyres on the front without any issue of causing damage. Remember, with odd sized and tread pattern tyres that your car will not handle correctly though.

Man, the more we see of you car the worse it gets. There isn't even enough car left to burn.... I don't honestly know why you just don't get another one. Besides, I would not piss on that thing even if it was on fire. No offence. Your chassis is shot to the sh!thouse and the boby has about 1oz of steel left, the rest of it has been eaten away. Look on ebay. The're as cheap as hell in the US and you can find them in good nick. Get something like this and put your running gear in it. Or this and then be done with it. These are only a couple of examples, there are heaps more. With the thousands and thousands of $$$$ you'll save, get a live axle put in the front.

This site is that slow atm that I time out.

Give this mob a shot. They say that they will only post to the US and Canada. If you order enough stuff they may come to the party. You will be struggling to find a headlight for that price in OZ. They go for $AU80 here second hand.

They, I'd imagine anyway, would have Navaras/Hardbodies perhaps? If not, ship from the US. Parts as so bloody cheap there its not funny.

Good luck.

You will have to import you stuff by the sounds of it. Make ebay your friend? http://cgi.ebay.com.au/NISSAN-PATHFINDER-W...1QQcmdZViewItem

If you ask any of us for an opinion on what sort of wheel nuts you should have (seems that's the only question you have not asked).. I will organise to have someone beat you to within an inch of your life.

Looking, looking... but not finding?

Where is the love for me? Where? If people called me a donkey, I'd say he aw he aw he always calls me that. Get it? It is a donkey noise. Oh, and thanks for killing this post. I mean it; thanks.

Ouch! Where is the love man?

ARB are not bolt on anymore? I wouldn't weld a bar to my Pathy in a blue fit. Or is it that you are referring to Heavy duty and light duty bars?

Ouch! That really hurt.

*sratches his head in disaray*

I have seen two (2) Pathfinders here in Oz with moulded rubber flooring in liu of carpet. Both were two door though. I would enquire at a Nissan dealership if you can get it over there. If not I might be able to inquire on your behalf here, we could also work out terms of payment and shipping if you were agreed to the price. That is if it can be obtained.