- Sign In Changes: You now need to sign in using the email address associated with your account, combined with your current password. Using your display name and password is no longer supported.
- If you are currently trying to register, are not receiving the validation email, and are using an Outlook, Hotmail or Yahoo domain email address, please change your email address to something other than those (or temporary email providers). These domains are known to have problems delivering emails from the community.
Leaderboard
Popular Content
Showing content with the highest reputation on 08/12/2025 in all areas
-
Bought the 28-Spline version of the SKP SK404461 manual locking hub (set of two). Will keep the thread updated if/when I get to it this week! Thanks again for the help on this so far, really appreciate it.1 point
-
No need to take out the headlight. The bottle is two parts: the body and neck. The next is attached besides the headlight using a 10mm nut. The neck just seals into the body and has an o-ring on it. The nuts that hold the body (also 10mm) are pretty accessible from underneath/behind the bumper cover. The washer pumps just press into the opening. If the hole is at the bottom, you might not need to remove anything. Not sure how you plan to patch it, but I recently patched mine using a 2-part Gorilla Glue epoxy. I accidentally cracked it at the corner. Despite it not being recommended for it due to the plastic type, it seems to have held on well enough so far. I just made sure to scuff and clean the area well enough and applied a generous amount. Heat from the cure didn't seem to be a problem.1 point