atlakeem Posted April 19, 2018 Share Posted April 19, 2018 ok so i found an 04 xterra transmission online 158k miles for a good price. Its an actually shop that sells it. They say the wiring may differ from my vehicle, which is a 96 Pathy. Anyone know for certain that the wiring will match with no problem? I've search but can't find someone who actually did the swap. (non-supercharged tranny btw) Link to comment Share on other sites More sharing options...
Cuong Nguyen Posted April 19, 2018 Share Posted April 19, 2018 (edited) ok so i found an 04 xterra transmission online 158k miles for a good price. Its an actually shop that sells it. They say the wiring may differ from my vehicle, which is a 96 Pathy. Anyone know for certain that the wiring will match with no problem? I've search but can't find someone who actually did the swap. (non-supercharged tranny btw)Should be plug and play. Sent from my SAMSUNG-SM-N920A using Tapatalk Edited April 19, 2018 by Cuong Nguyen Link to comment Share on other sites More sharing options...
Bunchie Posted April 20, 2018 Share Posted April 20, 2018 Consider the 8 years difference in vehicle age. LOTS of things change year to year, let alone 8. Just sayin... 1 Link to comment Share on other sites More sharing options...
Slartibartfast Posted April 20, 2018 Share Posted April 20, 2018 If Xterra transmissions fit WD21s, I don't see why they wouldn't fit R50s too. Link to comment Share on other sites More sharing options...
adamzan Posted April 20, 2018 Share Posted April 20, 2018 You will need: Xterra trans (obviously) Torque converter from Xterra trans (most places include this but make sure) If it is from a supercharged you'll need the flywheel as well Need to reuse the r50 sub-harness as it is the proper length Some extra vacuum line for the vent hoses It is plug and play. I have an 02 or 04 SC xterra transmission in my 1994 pathfinder. Has been in there since 2013. 1 Link to comment Share on other sites More sharing options...
atlakeem Posted April 21, 2018 Author Share Posted April 21, 2018 You will need: Xterra trans (obviously) Torque converter from Xterra trans (most places include this but make sure) If it is from a supercharged you'll need the flywheel as well Need to reuse the r50 sub-harness as it is the proper length Some extra vacuum line for the vent hoses It is plug and play. I have an 02 or 04 SC xterra transmission in my 1994 pathfinder. Has been in there since 2013. thank you very much! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now