Maz Posted January 31, 2006 Share Posted January 31, 2006 What size ring gear is in a pathfinder with the LSD? also what is the gear ratio it's a 91 and has discs Link to comment Share on other sites More sharing options...
Filthy Luker Posted January 31, 2006 Share Posted January 31, 2006 4.625 iirc Link to comment Share on other sites More sharing options...
vengeful Posted January 31, 2006 Share Posted January 31, 2006 Your rear axle is going to be the Nissan H233b with a 9.17" ring gear. Your gear ratio should be as Luker said 4.625:1. However, there is a way to check that. On your drivers door jamb, there should be a sticker with a lot of numbers and stuff on it. Find the Axle Code. If it says HG46, you've got the 4.625. If it says HG43, you've got the 4.36. Link to comment Share on other sites More sharing options...
Maz Posted January 31, 2006 Author Share Posted January 31, 2006 thanks for info I was curious if I could swap the gears into my b2200 but I guess I will have to find the whol axle and put it under it. That's the only way I can get a LSD for my b2200 (4.3 power that's why) Link to comment Share on other sites More sharing options...
Filthy Luker Posted January 31, 2006 Share Posted January 31, 2006 Just get a locker or better yet weld her up and be done with it. To actually pay for LSD is a waste of money. Nice to have stock but that's about it. Also the carriers and gears won't be compatibile with the Mazda stuff. Link to comment Share on other sites More sharing options...
MaritimeMan Posted January 31, 2006 Share Posted January 31, 2006 Tag for numbers Link to comment Share on other sites More sharing options...
88pathoffroad Posted January 31, 2006 Share Posted January 31, 2006 You guys...don't you remember that automatics have 4.625 gears, while manuals got 4.375? And it's 233mm on the ring gear... Link to comment Share on other sites More sharing options...
Maz Posted February 1, 2006 Author Share Posted February 1, 2006 thanks for the info I am thinkin I may just put a whole pathfinder rear under the mazda Link to comment Share on other sites More sharing options...
Pathfinder Phil Posted February 1, 2006 Share Posted February 1, 2006 You guys...don't you remember that automatics have 4.625 gears, while manuals got 4.375? And it's 233mm on the ring gear... Well, 233mm is 9.17 inches. And, again, not ALL autos have the 4.6 gears. I drive one that doesn't. Stock, at least gears anyway......heheheheee Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now