what size ring gear and ratio

[Maz]

What size ring gear is in a pathfinder with the LSD? also what is the gear ratio it's a 91 and has discs

[Filthy Luker]

4.625 iirc

[vengeful]

Your rear axle is going to be the Nissan H233b with a 9.17" ring gear.

 

Your gear ratio should be as Luker said 4.625:1. However, there is a way to check that. On your drivers door jamb, there should be a sticker with a lot of numbers and stuff on it. Find the Axle Code. If it says HG46, you've got the 4.625. If it says HG43, you've got the 4.36.

[Maz]

thanks for info I was curious if I could swap the gears into my b2200 but I guess I will have to find the whol axle and put it under it. That's the only way I can get a LSD for my b2200 (4.3 power that's why)

[Filthy Luker]

Just get a locker or better yet weld her up and be done with it. To actually pay for LSD is a waste of money. Nice to have stock but that's about it.

 

Also the carriers and gears won't be compatibile with the Mazda stuff.

[MaritimeMan]

Tag for numbers

[88pathoffroad]

You guys...don't you remember that automatics have 4.625 gears, while manuals got 4.375? And it's 233mm on the ring gear...

[Maz]

thanks for the info I am thinkin I may just put a whole pathfinder rear under the mazda

[Pathfinder Phil]

You guys...don't you remember that automatics have 4.625 gears, while manuals got 4.375? And it's 233mm on the ring gear...

Well, 233mm is 9.17 inches. And, again, not ALL autos have the 4.6 gears. I drive one that doesn't. Stock, at least gears anyway......heheheheee