Removing intake manifold VG30E

[Patricio]

Hi, Im bringing a 91 Pathfinder back to life and currently need to remove injectors but I can’t seem to find out how to remove the intake plenum, i’ve removed all the bolts I could find but still wont come off. Any help would be greatly appreciated

[Mr_Reverse]

You have 5 6mm Allen bolts, a couple of regular hex head bolts on the left side for the brace bracket, EGR pipe, wiring to unplug and grounds to undo. Also have 2 coolant hoses at the back and 2 more at the throttle body. Some vac lines are attached as well.  

[TheGhost]

On 7/28/2019 at 7:21 PM, Mr_Reverse said:

You have 5 6mm Allen bolts, a couple of regular hex head bolts on the left side for the brace bracket, EGR pipe, wiring to unplug and grounds to undo. Also have 2 coolant hoses at the back and 2 more at the throttle body. Some vac lines are attached as well.  

 

On 7/28/2019 at 5:24 PM, Patricio said:

Hi, Im bringing a 91 Pathfinder back to life and currently need to remove injectors but I can’t seem to find out how to remove the intake plenum, i’ve removed all the bolts I could find but still wont come off. Any help would be greatly appreciated

Anyone have a video of this? gota do it soon for a knock sensor...

[trenton163]

There is a lot of videos online. try searching for a xterra or frontier as they will have a similar process

 

 

[B.P.]

Theres a bolt goinh through the water neck.The front brace for with the idler pulley needs to come off to get to it