Baker95pathy Posted June 30, 2017 Share Posted June 30, 2017 Lifting and modifying my $400 pathfinder Link to comment Share on other sites More sharing options...
Baker95pathy Posted June 30, 2017 Author Share Posted June 30, 2017 I am fixing to lift my pathfinder with jeep grand Cherokee coil springs and a reindex of my t bars.do I have to change shocks or do anything with the sway bar links? Link to comment Share on other sites More sharing options...
KovemaN Posted June 30, 2017 Share Posted June 30, 2017 The rear shocks should be longer and it would also help to remove the rear sway-bar. Removing the front bar just makes it wobbly and the travel doesn't ever go beyond stock in the front with IFS. Link to comment Share on other sites More sharing options...
Baker95pathy Posted June 30, 2017 Author Share Posted June 30, 2017 Ifs huh? Will it be wobly without the rear sway bar? I will be getting new uca in the near future but for now this is all I can do. Link to comment Share on other sites More sharing options...
Baker95pathy Posted June 30, 2017 Author Share Posted June 30, 2017 And are there some shocks. Ngoc or others that will fit for the back Link to comment Share on other sites More sharing options...
Baker95pathy Posted June 30, 2017 Author Share Posted June 30, 2017 Jgc not Ngoc Link to comment Share on other sites More sharing options...
Baker95pathy Posted June 30, 2017 Author Share Posted June 30, 2017 Ok my pathfinder runs 3000 to 3500 rpm at 45 to 50 mph. I know that's to high but it seems to be shifting properly. Any ideas? Link to comment Share on other sites More sharing options...
OH6PILOT Posted August 6, 2017 Share Posted August 6, 2017 If it's running that high rpm at 45 to 50mph it's not shifting properly at all. Check to see if the overdrive is functioning properly. 1 Link to comment Share on other sites More sharing options...
Baker95pathy Posted August 14, 2017 Author Share Posted August 14, 2017 Yes overdrive is working. It shifts through every gear fine . Link to comment Share on other sites More sharing options...
Slartibartfast Posted August 17, 2017 Share Posted August 17, 2017 Is the power mode switch on? That'll delay upshifts. Lower gear, higher revs. Link to comment Share on other sites More sharing options...
Baker95pathy Posted August 18, 2017 Author Share Posted August 18, 2017 The switch is off and when I turn it on it runs higher rpms Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now