replacing tranny in 93 4x4

[terry54]

Does anyone know the torque on the bolts on the torque converter where it connects to flywheel in a 6 cyclinder

[Precise1]

Hello Terry, I'm moving this to the Garage section where it will get a lot more views.

I looked through the AT section of the FSM (downloadable for free from the pinned thread in the Garage section) but couldn't find the torque spec. Hopefully someone who has done this will remember or know where to find it.

 

B

[adamzan]

I want to say its around 40 ft lbs but double check the fsm to be sure.

[RedPath88]

Are you referring to the four bolts on the front of the torque converter? If so then it's 33-43 ft-lb. But look at the diagram on page AT-115 of the 1994 FSM and verify for yourself.

[Precise1]

Thanks Red, I knew I was overlooking it...

 

B