Car shaking violently at high speeds

[Alkorahil]

My technique is to soak the bolts in PB blaster for a few hours (PB Blaster>WD40). just repeat the spray every 20-30 mins a few times, and then let it sit for a while.

 

IMHO if you dont have PB blaster in your tool box/tool cabnet, you are just wrong.

I feel so strongly about this that it may not be opinion, it borders on fact.

[Nefarious]

PB Blaster is nectar of the mechanical gods. By far the best penetrant that I have ever used.

[Precise1]

What other ones have you used?

 

B

[ahardb0dy]

My buddy back home used to have this stuff think it was called Kroil, orange can was pretty good if I recall correctly

 

Edited November 6, 2013 by ahardb0dy

[Nefarious]

Pb blaster, wd40, generic Canadian tire penetrating oil, freeze off, kroil. Pb blaster has been the best by far.

[Precise1]

Yes, Kroil is good as well, very popular with mold makers. Too bad all the good ones stink to holy hell...

I agree that PB Blaster works well. Liquid Wrench is another...

 

I'd have a hard time calling WD-40 a penetrating oil, no matter what it says on the can. You'd probably get the same effect peeing on the stuck part...

 

B