rbaum94 Posted September 24, 2013 Share Posted September 24, 2013 Does anyone know the alarm switch's part number on a 94 pathy xe? Its the 3 button security switch thats to the right of the ebrake, I broke mine by accident and had to disconnect my alarm and keyless.. It was faulty anyway so I want to get a new one so the alarm actually works. lol. Link to comment Share on other sites More sharing options...
k9sar Posted September 24, 2013 Share Posted September 24, 2013 I'm not sure of the part number but that's a pocket-item from a u-pull-it. I'm going within a couple weeks so I can grab one out of a junker if I see one. I'll keep an eye on this thread just in case. That's a 3-position rocker (off | on | impact off) or something like that, right? Link to comment Share on other sites More sharing options...
Alkorahil Posted September 24, 2013 Share Posted September 24, 2013 PART NUMBER: 999M2-ID001 DESCRIPTION: STATUS MONITOR $19.40 (Nissan list: $41.32) This part is still available from Nissan. Link to comment Share on other sites More sharing options...
Nissanland Posted September 24, 2013 Share Posted September 24, 2013 heck, the alarm on my 95 goes off at the slightest movement, had to pull the horn relay or pull battery post. I can't seem to find the fuse to pull, or power source. I don't need dead truck in morning. I think I'll go to car toys for new reliable alarm system. Link to comment Share on other sites More sharing options...
Alkorahil Posted September 24, 2013 Share Posted September 24, 2013 heck, the alarm on my 95 goes off at the slightest movement, had to pull the horn relay or pull battery post. I can't seem to find the fuse to pull, or power source. I don't need dead truck in morning. I think I'll go to car toys for new reliable alarm system. You can adjust the sensitivity on the shock sensor Link to comment Share on other sites More sharing options...
Nissanland Posted September 25, 2013 Share Posted September 25, 2013 Where would I find that on a stock alarm. If I can fix it that way then it would be money saved.. Link to comment Share on other sites More sharing options...
Alkorahil Posted September 25, 2013 Share Posted September 25, 2013 The shock sensor is a black box about 2x2x1 inches witha harness coming aout of it. It was usually mounted on the firewall up behind the pedals. Link to comment Share on other sites More sharing options...
Nissanland Posted September 25, 2013 Share Posted September 25, 2013 Thx for the information. I will check it out.. Link to comment Share on other sites More sharing options...
silverton Posted September 29, 2013 Share Posted September 29, 2013 (edited) The shock sensor is a black box about 2x2x1 inches witha harness coming aout of it. It was usually mounted on the firewall up behind the pedals. Who installed your factory alarm? Thx for the information. I will check it out.. Shock Sensor Sensitivity setting is generally on the alarm brain, which on my two trucks (both 95's, one XE, one SE), is installed under the driver seat. It has a Low, Medium, and High setting. From the factory it's set to Medium but someone must have set yours to High. Edited September 29, 2013 by silverton Link to comment Share on other sites More sharing options...
Nissanland Posted September 29, 2013 Share Posted September 29, 2013 I will check both area's out, don't know about who installed the alarm. Was only told it came from dealer with it installed. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now