aw12345 Posted January 27, 2013 Share Posted January 27, 2013 Hi all, I have a 89 Pathfinder buggy that uses part of the frame and engine and trans from a89 pathfinder. Several previous owners hacked up all the wiring and it did not run. Since then I got the engine wiring repaired and it runs good. Now I am on the hunt for a TCM. Been to several you pick you pulls found a spare ecm, but for the life of me cannot find where the TCM is located in the truck can anybody help me with this? I scrounged through atleast 5 Pathfinders and no dice. This is my lil tinker project Link to comment Share on other sites More sharing options...
Inyourface1650 Posted January 27, 2013 Share Posted January 27, 2013 It's behind the driver rear quarter panel....just pull off the plastic panel and it's bolted to the side. Don't ask me why it's back there Link to comment Share on other sites More sharing options...
Slartibartfast Posted January 27, 2013 Share Posted January 27, 2013 Looks like quite a project! Link to comment Share on other sites More sharing options...
Leo94 Posted January 27, 2013 Share Posted January 27, 2013 I counted 7 axle stands . Welcome to Npora. Link to comment Share on other sites More sharing options...
nunya Posted January 27, 2013 Share Posted January 27, 2013 It's behind the driver rear quarter panel....just pull off the plastic panel and it's bolted to the side. Don't ask me why it's back there Weight balance Kidding of course but that's the correct location Link to comment Share on other sites More sharing options...
aw12345 Posted January 27, 2013 Author Share Posted January 27, 2013 Thanks guys, will head back to the junkyard tomorrow and see if I can snare me one. I have a rail shifter but from looking at the wiring diagrams, it needs a bit more than that to make it work properly. Kinda partial to Jeeps so this one might end up sporting a Jeep grille also lol These are my other 4x4 put put Jeeps Link to comment Share on other sites More sharing options...
The_Magicians_Eye Posted March 20, 2013 Share Posted March 20, 2013 (edited) So you're the one that ended out with this awesome rig! I thought this was gone... Saw the build pics but read it was sold or parted out or something. Don't put the jeep grill on it. I'm pretty sure the tube work in the front \ / was put there as a subtle indication that this is a Nissan. Edited March 20, 2013 by The_Magicians_Eye Link to comment Share on other sites More sharing options...
The_Magicians_Eye Posted March 20, 2013 Share Posted March 20, 2013 P.S. Stick around. You're one of us now. Be different and proud of it. Link to comment Share on other sites More sharing options...
Slartibartfast Posted March 20, 2013 Share Posted March 20, 2013 Join the cult! Link to comment Share on other sites More sharing options...
The_Magicians_Eye Posted March 24, 2013 Share Posted March 24, 2013 By the way this is what you're looking for and it's located on the passenger side rear quarter panel Pull the lower plastic above the wheel well and you'll see it. Mine had a sticker on it with the letter "H". Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now