Trogdor636 Posted October 31, 2012 Share Posted October 31, 2012 A loose distributor cap is never good. Link to comment Share on other sites More sharing options...
Leo94 Posted October 31, 2012 Share Posted October 31, 2012 Did you get around to checking the wires? Link to comment Share on other sites More sharing options...
NissanNismoZ Posted October 31, 2012 Author Share Posted October 31, 2012 Wires..I sprayed them down with the hose and couldnt see any arcing..ill try again tonight where i can actually see it. But the loose cap does explain why after id clean the engine bay it would miss and stumble.. i do know it didnt do the stumbling again.. who knows! This may have fixed it! Ill keep posted. Tonight after work will be the real test.. Thanks! Link to comment Share on other sites More sharing options...
NissanNismoZ Posted October 31, 2012 Author Share Posted October 31, 2012 Also. As far as MAF goes.. I think mine has the revised connector..as I've not seen one like it. But wiggling didn't do anything and if it.does it again I'll definitely start diagnostics on the MAF Link to comment Share on other sites More sharing options...
Precise1 Posted October 31, 2012 Share Posted October 31, 2012 FYI, if you think moisture in the dizzy is the cause, give it a quick shot of WD-40 and retest. Best application for that product I have found yet... B Link to comment Share on other sites More sharing options...
NissanNismoZ Posted October 31, 2012 Author Share Posted October 31, 2012 Yeah..that didn't fix it..in fact I drove exactly a mile and it did it. Then it lasted for 4-5 miles until it stopped..it seems if I stay on the gas it'll go..if I let off any little bit it'll make the sound and try to die until I feather it enough to start going again and shift down.. Link to comment Share on other sites More sharing options...
adamzan Posted October 31, 2012 Share Posted October 31, 2012 Change your o2 sensor. Link to comment Share on other sites More sharing options...
NissanNismoZ Posted October 31, 2012 Author Share Posted October 31, 2012 Will do! Payday is tomorrow and so I'll have it done tomorrow.thanks! Link to comment Share on other sites More sharing options...
NissanNismoZ Posted November 1, 2012 Author Share Posted November 1, 2012 Hah..some reason I confused today with Friday Will be getting it fixed tomorrow. Glad To say it did it twice today.. the second time made me mad as I was in the middle of traffic..so I pulled off and unplugged the o2 and tada! Problem was gone. Plugged it back in and it stumbled again. So Link to comment Share on other sites More sharing options...
Trogdor636 Posted November 1, 2012 Share Posted November 1, 2012 You may wanna try to do it yourself.....its a big wrench (90-93's are a 17mm I think, 94-95 are 22mm) but its easy enough to get to. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now