shasdakota Posted November 10, 2011 Share Posted November 10, 2011 hey guys, i'll be replacing my stock TRE's with some new one's from Moog. but i didnt order any Moog Adjusting Sleeves (the center portion that the TRE's thread into), because they didnt have any in stock, and my adjusting sleeves look fine. my question is, will i be able to use the Moog TRE's with the stock nissan adjusting sleeve? i know the nissan sleeve will be metric, and i presume the Moog adjusting sleeve should also be metric, since they are from Japan. does anyone know? thanks, josh Link to comment Share on other sites More sharing options...
adamzan Posted November 10, 2011 Share Posted November 10, 2011 Yes they will work with the stock sleeves. Link to comment Share on other sites More sharing options...
shasdakota Posted November 10, 2011 Author Share Posted November 10, 2011 nice, thanks adam... Link to comment Share on other sites More sharing options...
nunya Posted November 11, 2011 Share Posted November 11, 2011 You should be able to screw em right in, just remember to count the turns! You get ones with zerks fittings or 'sealed' (shivers) ones? Link to comment Share on other sites More sharing options...
sewebster Posted November 11, 2011 Share Posted November 11, 2011 Don't grease them before installation or they'll explode. Link to comment Share on other sites More sharing options...
shasdakota Posted November 11, 2011 Author Share Posted November 11, 2011 i got the one's w/ zerks... i was gonna mark my old tre's before removing them, so i knew how far each side was screwed into the adjusting sleeve. and i could count turns as well... Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now