pathyboy12 Posted July 15, 2010 Share Posted July 15, 2010 i was wondering if anybody had a piar of strut spacers for a 96'. if not, then where could i find some? thanks in advance Link to comment Share on other sites More sharing options...
exit34rocker1017 Posted July 15, 2010 Share Posted July 15, 2010 NX4 INDUSTRIES http://www.nx4industries.com/ Link to comment Share on other sites More sharing options...
fleurys Posted July 15, 2010 Share Posted July 15, 2010 NX4 INDUSTRIES http://www.nx4industries.com/ Sorry to say, but I have emailed and pm the guy many times since april 2009 with no answer.... very disapointed... I will be making my own this winter... Link to comment Share on other sites More sharing options...
180sx Posted July 15, 2010 Share Posted July 15, 2010 http://www.rocky-road.com/pathfindersus.html they sell a 9/16" spacer from OME. don't know how much it cost, but maybe that? Jose Link to comment Share on other sites More sharing options...
Daddy Rim Posted July 15, 2010 Share Posted July 15, 2010 Sorry to say, but I have emailed and pm the guy many times since april 2009 with no answer.... very disapointed... I will be making my own this winter... True, I was slow to respond to you about rear spacers as I have not yet made any, but I always have 1" front strut spacers in stock and now also have 3/16" steel strut flanges which can be used to make the front lift blocks for folks doing subframe drops. Apologies to anyone who I have been slow to respond too, but between full time work and consulting, the parts business suffers. Link to comment Share on other sites More sharing options...
pathyboy12 Posted July 15, 2010 Author Share Posted July 15, 2010 i think ill need 1". and I'm getting the AC suspension lift. Link to comment Share on other sites More sharing options...
morpheus Posted July 15, 2010 Share Posted July 15, 2010 When I installed 1" strut spacers with the AC lift coils, the front end actually sat higher than the rear. The AC lift takes some time to settle, but I took my spacers right back out after installing them, and never got around to putting them back in. Link to comment Share on other sites More sharing options...
pathyboy12 Posted July 15, 2010 Author Share Posted July 15, 2010 i planned on putting a brush bar on to. was the height in the front pretty noticeable? or no? Link to comment Share on other sites More sharing options...
fleurys Posted July 16, 2010 Share Posted July 16, 2010 (edited) True, I was slow to respond to you about rear spacers as I have not yet made any, but I always have 1" front strut spacers in stock and now also have 3/16" steel strut flanges which can be used to make the front lift blocks for folks doing subframe drops. Apologies to anyone who I have been slow to respond too, but between full time work and consulting, the parts business suffers. Hey Daddy....you're alive !! :-) I<m happy to see that nothing bad happened to you... Since you told me in 2009 that you planned on offering a special front and rear spacers for christmas (2009), you have to understand my concerns when nothing came from you, either from emails or pms.... the last one I wrote you was start of june... Don't want to hijack the thread, but welcome back ! Edited July 16, 2010 by fleurys Link to comment Share on other sites More sharing options...
morpheus Posted July 16, 2010 Share Posted July 16, 2010 i planned on putting a brush bar on to. was the height in the front pretty noticeable? or no? It was over an inch higher in the front, now that was before I installed my KMA bumper and winch, so I'm sure it settled, just never went back and re-measured, or re-installed the spacers. Now that the pathy's up for sale, I may never re-install them. Link to comment Share on other sites More sharing options...
pathyboy12 Posted July 16, 2010 Author Share Posted July 16, 2010 It was over an inch higher in the front, now that was before I installed my KMA bumper and winch, so I'm sure it settled, just never went back and re-measured, or re-installed the spacers. Now that the pathy's up for sale, I may never re-install them. where did you get the bumper? Link to comment Share on other sites More sharing options...
exit34rocker1017 Posted July 16, 2010 Share Posted July 16, 2010 www.kenmtn.com Link to comment Share on other sites More sharing options...
tekazgtr1984 Posted July 19, 2010 Share Posted July 19, 2010 It was over an inch higher in the front, now that was before I installed my KMA bumper and winch, so I'm sure it settled, just never went back and re-measured, or re-installed the spacers. Now that the pathy's up for sale, I may never re-install them. You're selling it?! But why? You've done so much to it... Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now