elmiguelon Posted May 24, 2010 Share Posted May 24, 2010 Hi! last saturday the problem began, at morning my path 97 start with no problem but after an hour turn off and when turn on again dont start, i turn the switch and the ligths on dash light up but the starter don't work, i review the fuses and all right, after 15-20 minutes and and many attempts, my pathfinder start. Same thing happened on Sunday. Any idea to begin the review?? PD: sorry for my bad english i'm from México!! Thank's Link to comment Share on other sites More sharing options...
Alkorahil Posted May 25, 2010 Share Posted May 25, 2010 I cant think of anything temperature realted that would make a starter not engage..... Three things come to mind here: 1) Check the battery terminals for corrosion and make sure they are clean and tight. The starter needs all the power from the battery to turn over. 2) Make sure the battery is good as well. 3) Check the ignition relays and make sure they are clean and secure with no corrosion. Link to comment Share on other sites More sharing options...
XPLORx4 Posted May 26, 2010 Share Posted May 26, 2010 First, clean your battery terminals and check the battery cables for corrosion. You may also want to check the battery cable connection at the starter motor itself. After you confirm the wires and connections are good, if the starter still doesn't engage reliably, it sounds like the starter motor may need to be replaced. However, if the starter cranks the engine but it does not fire up, that's a whole different diagnosis. Link to comment Share on other sites More sharing options...
elmiguelon Posted May 27, 2010 Author Share Posted May 27, 2010 Thank's for your answers, the battery and terminals are good, clean and tight, i'll go to check wires to starter and relays, any idea to check relay or only change. thanks for your time!! Link to comment Share on other sites More sharing options...
180sx Posted May 27, 2010 Share Posted May 27, 2010 does the motor crank or when you turn the key nothing happens? Jose Link to comment Share on other sites More sharing options...
elmiguelon Posted May 27, 2010 Author Share Posted May 27, 2010 nothing happens, there are power in all system (window's, ligths, stereo, etc) but starter don't work and don't do any noise… Link to comment Share on other sites More sharing options...
Alkorahil Posted May 27, 2010 Share Posted May 27, 2010 Ignition switch? Link to comment Share on other sites More sharing options...
fleurys Posted May 27, 2010 Share Posted May 27, 2010 I had the same behavior with my crown vic long ago... The Starter is going bad.... Why it starts sometimes and why it does not is related to where the bendix on the starter stops when you're finish starting the car. I see that you brushes are probably used more at some places than other and sometimes they will be far apart just enough for not letting the current pass, then after a couple of tries they will... Personally, I would change the starter and be done with it. S. Link to comment Share on other sites More sharing options...
Alkorahil Posted May 31, 2010 Share Posted May 31, 2010 If the starter is the original it wouldnt hurt to replace it anyways. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now