3.0 To 3.3

[Nismojunky]

my motor is getting tired and my RMS is leaking passenger side lifters are ticking bad so im thinking of swaping a new motor in i remember reading that the 3.3 is a direct bolt in and uses the same sensors and wireing harness, is this true and is there anything else i need to modify to make that engine fit and one other question i have pacesetter headers will they fit the 3.3?

[Kingman]

[Nismojunky]

tried it didnt find anything

[silverton]

Didn't try hard enough than.

 

search for vg33 swap or something like that.

[MY1PATH]

go onto 4x4parts discussion board and search Chevyman_57 he has a very good writeup. I would link it to ya but this is not my primary computer.

[Cuong Nguyen]

I'm currently doing the swap. It's a direct bolt in. You'll need to swap over the upper intake assembly and do some small mods to make it work but nothing overly complicated that a typical guy can't handle. There are a few guys who recently completed the swap on this board.

 

Nissannut has some good information as well.

www.nissannut.com/maintenance/vg33e_upgrade

[TerranoNZ]

Here's some info that may be useful

 

http://www.nissanpathfinders.net/forum/index.php?showtopic=17624&st=0&p=288240&hl=big%20block&fromsearch=1entry288240

[Pezzy]

 

Not helpful.

 

go onto 4x4parts discussion board and search Chevyman_57 he has a very good writeup. I would link it to ya but this is not my primary computer.

 

Helpful.

 

 

See the difference?

[Manifesto]

www.nissannut.com/maintenance/vg33e_upgrade

 

**bookmarked for future reference!**

 

I miss having vg33e power xD