Jump to content
  • Sign In Changes:  You now need to sign in using the email address associated with your account, combined with your current password.  Using your display name and password is no longer supported.

 

  • If you are currently trying to register, are not receiving the validation email, and are using an Outlook, Hotmail or Yahoo domain email address, please change your email address to something other than those (or temporary email providers). These domains are known to have problems delivering emails from the community.

Transmission Install

94pathfinder

By 94pathfinder,
in 90-95 WD21 Pathfinders

 Share

Recommended Posts

94pathfinder NPORA Veteran

94pathfinder

Posted
Posted

so after dropping the transmission out of my truck, and watching the bad one roll off of the tranny jack, i realized maybe if i had removed the transfer case, it would have been easier. So my thoughts are removing the transfercase, and the install it once the transmission is in the truck. so once i remove the transfer case, what is going to pop out and bearings, or what not, or just the output shaft fron the transmission.

 

Thank you for you're help

John

Link to comment
Share on other sites
MY1PATH NPORA Old-Timer

MY1PATH

Posted
Posted

well if its a manual transmission the last 1/2qt of oil thats in the tranny will spill out because it seals against the t-case. put a bag or someting over the end so dirt from your under carrage doesn't get inside. this little bit doesn't come out when you drain becase there is a rise in the casting to the output bearing that separates the last section from the drain plug.

 

If its an AT forget everything I just said all will be fine.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing
×
×
  • Create New...