Toby Posted October 25, 2009 Share Posted October 25, 2009 (edited) wtf is this wire? I replaced that vinyl covered trim piece and there was that wire just hanging out there. It's not to the domelight wire in any way either. Also sorry for the low quality pic. My camera didn't want to take good pictures of it. Edited October 25, 2009 by Toby Link to comment Share on other sites More sharing options...
adamzan Posted October 25, 2009 Share Posted October 25, 2009 I think it's the prewiring for your map lights. Magregor had the same on his truck. There is another length of wire that goes along the edge to the mirror if you had the map lights. Link to comment Share on other sites More sharing options...
Toby Posted October 25, 2009 Author Share Posted October 25, 2009 I think it's the prewiring for your map lights. Magregor had the same on his truck. There is another length of wire that goes along the edge to the mirror if you had the map lights. Not following. They had the maplights in 94? And if it's for a maplight why is it all the way at the middle of the truck? Link to comment Share on other sites More sharing options...
GrimGreg Posted October 26, 2009 Share Posted October 26, 2009 Not following. They had the maplights in 94? And if it's for a maplight why is it all the way at the middle of the truck? It is the maplight wire. You can add the light to your's really easily (I did it on my 93). In models without the map lights, they just taped the wire off to the dome light wire. If you pull the trim above the door off you can see where it splits off the dome light wires. Link to comment Share on other sites More sharing options...
Toby Posted October 26, 2009 Author Share Posted October 26, 2009 i'll look into it. I gotta go pull a front right fender today. I was trying to even up my signal light and found out the damage was worse to that fender than I originally though. The lamp is held in with wood screws and wood behind it. Gotta knock part of that metal backing out too cause that side of the grill is held in a similar way as well. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now