warrenmh Posted May 31, 2009 Share Posted May 31, 2009 i have just taken my 1990 4 door diesel in for a w.o.f (vehicle road worthy cert) to find the front suspension mount cracked through below the chassis, i have ground it out and re-welded it but im thinking of getting a new chassis, does anyone know if the two door pathy diesel has the same chassis as the 4 door. as ive seen one going cheap and was thinking of getting it . and maybe having it galvanised or zinc sprayed has anyone done this? Link to comment Share on other sites More sharing options...
MY1PATH Posted June 1, 2009 Share Posted June 1, 2009 I do belive the chasis is the same but there may be a few minor differances; mounting brackets for various lines and wires... ya know the stuff you can prolly fix if your able enough to do a chasis swap in the first place. Link to comment Share on other sites More sharing options...
warrenmh Posted June 1, 2009 Author Share Posted June 1, 2009 I do belive the chasis is the same but there may be a few minor differances; mounting brackets for various lines and wires... ya know the stuff you can prolly fix if your able enough to do a chasis swap in the first place. Thanks for that, my main concern was seat belt mounts, torsion-bars and rear suspension hangers....and an overhead crane in my garage would help..thanks again...... warren Link to comment Share on other sites More sharing options...
RedPath88 Posted June 1, 2009 Share Posted June 1, 2009 All those are the same in 2 and 4 door models Link to comment Share on other sites More sharing options...
GrimGreg Posted June 1, 2009 Share Posted June 1, 2009 Yep, frames are 99% the same, and the differences are nothing that would hinder anything. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now